[问答题]You are the network administrator for Ezonexam.You plan to upgrade 550 computers from Windows 95 to Windows 2000 Professional. You create an Unattend.txt file by using Setup Manager. You copy the file to the network share that will be used to install Windows 2000 Professional. You start the installation on a test computer by using a network shared folder and an answer file. When the installation is complete, you realize that the upgraded computers are not utilizing their entire hard disks.You want to ensure that the unattended installation utilizes the entire hard drive on all computers.What should you do? (Each correct answer presents part of the solution. Choose two)A.Add an [Unattended] section to Unattend.txt, and set the File System parameter to Convert NTFS.B.Rename Unattend.txt to Cmdlines.txt and copy it to the \$OEM$ subdirectory.C.Add a [GUIRunOnce] section to answer file, and add an entry for the Unattend.txt file.D.Create a \$OEM$\S$ folder on the hard disk of the test computer, and copy Unattend.txt to the folder.E.Add an [Unattended] section to Unattend.txt, and set the Extend OEM Partition to 1.F.Add an [Unattended] section to Unattend.txt, and set the Extend OEM Partition parameter to 999.
[问答题]2013网络工程师考试试题计算机指令一般包括操作码和地址码两部分,为分析执行一条指令,其 (1)A. 操作码应存入指令寄存器(IR),地址码应存入程序计数器(PC).B. 操作码应存入程序计数器(PC),地址码应存入指令寄存器(IR).C. 操作码和地址码都应存入指令寄存器.D. 操作码和地址码都应存入程序计数器求解析.
[问答题]You are the administrator of Microsoft Windows 2000 computer. You are preparing to install SQL Server 2000 on the computer.Your company contains a variety of client computers that will connect to the SQL server 2000 computer by using a specific Net-Library, as shown in the following table.ClientcomputerMicrosoftWindowswellNetWareoDIeMacintoshYou need to allow the client computers to connect to the SQL Server 2000 computer. You also want to minimize the number of configuration changes required on the client computers.Which three actions should you take? (Each correct answer presents part of the solution. Choose three)A. Install SQL Server 2000 as a named instance.B. Install SQL Server 2000 as the default instance.C. Configure the new instance for Mixed Mode Authentication.D. Configure the new instance for Windows Authentication.E. Configure the server to use the Named Pipes, IPX/SPX, and TCP/IP Net-Libraries.F. Configure the server to use the Multiprotocol Net-Library.
[问答题]Exhibit:BULK INSERT Ezonexam.dbo.employeesFROM ‘tk\africe\fubar512.txt’WITH DATAFILETYPE = ‘char’,FIELD/TERMINATOR = ‘\t’,ROWTERMINATOR = ‘\n,’TABLOCKYou work as database administrator at Ezonexam.com. You handle one SQL Server 2000 computer.How should you improve the performance of the query in the exhibit above?A. Extend the BULK INSERT statement with the BATCHSIZE option set it to equal to 5 percent of the number of rows to be loaded.B. Extend the BULK INSERT statement with the BATCHSIZE option set it to equal to 10 percent of the number of rows to be loaded.C. Extend the BULK INSERT statement with the ROWS_PER_BATCH option set it to equal to 5 percent of the number of rows to be loaded.D. Extend the BULK INSERT statement with the ROWS_PER_BATCH option set it to equal to 10 percent of the number of rows to be loaded.E. Insert a line before the BULK INSERT statement that drops the indexes for the customers table. Insert a line after the BULK INSERT statement that recreates the indexes for the customers table.F. The TABLOCK option should be removed.G. The ROWTERMINATOR line should be removed.
[问答题]You are the administrator of a SQL Server 2000 computer. The server is configured as shown in the Database Server Configuration exhibit.DatabasePhysical disk 0Physical disk 1Physical disk 2Drive CDrive DDrive E4 GB9 GB9 GBFAT32NTFSNTESYou need to create a new database named Inventory. Employees in your company will use the Inventory database to track inventory data. Users will require immediate responses to queries that help them locate where parts are stored. The tables in the database will be configured as shown in the Database Schema exhibit.ManufacturerPartsParts oca tionsPansIDorationddressManufacturers□ PhoneCubicfeetThe database will consume 14 GB of disk space. You must configure the data files and transaction log to accelerate query response time.Which two courses of action should you take? (Each correct answer represents part of the solution. Choose two.)A. On drive C, create a transaction log.On drive D, create a data file in the PRIMARY filegroup.On drive E, create a data file in the SECONDARY filegroup.B. On each drive, create a transaction log.On each drive, create a data file in the PRIMARY filegroup.C. On drive D, create a transaction log.On drive E, create a data file in the PRIMARY filegroup.D. On the PRIMARY filegroup, create all tables and all indexes.E. On the PRIMARY filegroup, create all tables. On the SECONDARY filegroup, create all indexes.F. On the PRIMARY filegroup, create the Parts table and its indexes.On the SECONDARY filegroup, create all other tables and their indexes.
[问答题]You are the network administrator for Ezonexam.ServerEzonexam14 is a Windows NT Server 4.0 computer. ServerEzonexam14 is also a member server in a Windows 2000 domain named marketing.Ezonexam.local. The marketing.Ezonexam.local domain also has five Windows NT Server 4.0 backup domain controllers.You want to upgrade ServerEzonexam14 to a Windows 2000 member server in the marketing.Ezonexam.local domain. You also want to be able to implement Universal Groups in the marketing.Ezonexam.local domain.What should you do? (Each correct answer presents part of the solution. Choose three)A. Reinstall Windows NT Server 4.0 on ServerEzonexam14 in the same WINNT folder, and make ServerEzonexam14 a BDC in the marketing domain.B. Run the Active Directory Installation Wizard to make ServerEzonexam14 a domain controller in the marketing.Ezonexam.local domain.C. Run the Active Directory Installation Wizard to convert ServerEzonexam14 to a domain controller in the fabrikam.local domain.D. Upgrade all the Windows NT Server 4.0 backup domain controllers in marketing.Ezonexam.local to Windows 2000 Server.E. Upgrade all the Windows NT Server 4.0 backup domain controllers in Ezonexam.local to Windows 2000 Server.F. Upgrade ServerEzonexam14 to Windows 2000 Server.G. Upgrade the marketing.Ezonexam.local domain to native mode.
[问答题]You are the network administrator for Ezonexam. You are installing Windows 2000 Server on a new computer by using the Windows 2000 Server compact disk. The computer has five 18-GB hard disks Dick0, Disk1, Disk2, Disk3, and Disk4. The disks do not have any partitions defined.You want to use as much space on Disk0 as possible for the partition on which Windows 2000 Server is installed. You want the disk on which you install Windows 2000 Server to be fault tolerant. You also want as much disk space as possible across the other disks to be available for data storage and to be fault tolerant.What should you do? (Each correct answer presents part of the solution. Choose three)A. Install Windows 2000 Server on a 4-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.B. Install Windows 2000 Server on a 18-GB NTFS partition on Disk 0. Configure the five disks as dynamic disks.C. Create a RAID-5 volume using Disk2, Disk3, and Disk4.D. Create a stripped volume using Disk2, Disk3, and Disk4.E. Create a RAID-5 volume using all disks.F. Create a stripped volume using all disks.G. Select the volume on Disk0 and add a mirror using Disk1.
[问答题]You are the domain administrator for Ezonexam.com. The network contains a Windows 2000 domain and two Windows NT domains. The Windows 2000 domain trusts each of the Windows NT domains, and the Windows NT domains trust the Windows 2000 domain.You are required to configure one of the Windows 2000 domain controllers named Ezonexam4 to support several legacy applications that are not Windows 2000 certified.What should you do? (Select two. Each answer specifies a complete solution).A. On Ezonexam4, type secedit /configure /db secedit.sdb /cfgC:\winnt\security\templates\hisecdc.inf /overwrite.B. On Ezonexam4, type secedit /configure /db secedit.sdb /cfgC:\winnt\security\templatescompatws.inf /overwrite.C. On Ezonexam4, use the Security Configuration and Analysis snap-in to apply the Compatws.inf security template.D. On Ezonexam4, use the Security Configuration and Analysis snap-in to apply the Hisecdc.infE. On Ezonexam4, use the Security Templates snap-in to open the Compatws.inf security template.F. On Ezonexam4, use the Security Templates snap-in to open the Hisecdc.inf security template.
[问答题]You are the administrator of a Windows 2000 Server computer named Ezonexam1. A printer named PrinterColor is configured on Ezonexam1.You want to allow only users in the Administrators group and users in the Managers group to print to PrinterColor. You also want to allow users in the Managers group to pause and resume their print jobs, and you want to ensure that users in the Administrators group have full control permission for PrinterColor.What should you do?To answer, click the Simulation button and then perform. the appropriate actions in the simulation of the Printers folder.
[问答题]You are the administrator of a SQL Server 2000 database. You import a table of geographic information from a Microsoft access database into a SQL Server 2000 database. The table has 12,000 rows. Each row averages 5,000 bytes. The table contains lockup data that does not change.You want to minimize the size of the data file and the time required to back up the data. Which two actions should you take? (Each correct answer presents part of the solution. Choose two)A. Create a 60-MB data file named geography.ndfB. Create a 95-MB data file named geography.ndfC. Create a 60-MB data file named geography.mdfD. Create a 95-MB data file named geography.mdfE. Place the table in the PRIMARY filegroup.F. Place the table in a new filegroup named LOCATION.
[问答题]You are the administrator of a Windows 2000 Server network at Ezonexam.You configure a server named print10.marketing.Ezonexam.com.local as a print server at the Los Angeles office. You create and share printers on the server for use by employees in the marketing,Ezonexam.local domain.You want to review the configured properties of all of the shared printers on the print10.marketing.Ezonexam.local server. You want to perform. this review from a Windows 2000 Professional computer at the London office of Ezonexam.What can you do? (Each correct answer presents a complete solution. Choose two)A. Use your Web browser to connect to http://print10.london.Ezonexam.local/printers/.B. Use your Web browser to connect to http://print10.marketing.Ezonexam.local/printers/.C. Run the net view \\print10 command.D. Run the net view \\print10.marketing.Ezonexam.com command.E. Browse to \\print10.marketing.Ezonexam.local and open the Printers folder.F. Browse to \\print10.london.Ezonexam.local and open the Printers folder.
[问答题]You are the desktop administrator of your Windows 2000 Professional computer.On your computer you have a printer named LaserJet that is attached to your local LPT1 port. You have shared LaserJet and given Print permission to the Sales group. You are a member of the Sales group. On many occasions you find that you have to wait a long time for your print jobs because there are several jobs ahead of yours. You create a second printer named LaserJet2 using LPT1 port and the default settings.You want to ensure that you do not have to wait for other print jobs before your print jobs can complete.What should you do? (Each correct answer presents part of the solution. Choose two)A.Grant only your account Print permission to LaserJet2.B.Deny Print permission to the Sales group on LaserJet2.C.Configure LaserJet to Start printing after last page is spooled.D.Configure LaserJet to Print directly to the printer.E.Set the priority of LaserJet to 10.F.Set the priority of LaserJet2 to 99.
[问答题]You are the network administrator for Ezonexam. The network includes a Microsoft Windows NT Server 4.0 member server computer that has a non-Plug and Play ISA network adapter.You want to upgrade this computer to Microsoft Windows 2000 Server. You also want to ensure that you maintain the current device configuration during the upgrade.What should you do? (Each correct answer presents part of the solution. Choose two)A. Install the latest driver for the network adapter.B. Disable the network adapter.C. Start the upgrade process by using Winnt32.exeD. Start the upgrade process by booting from the Windows 2000 Server compact disc.E. Configure BIOS to reserve the IRQ currently in use by the network adapter.F. Press F6 at the beginning of the text mode setup to specify an additional driver.
[问答题]You want to upgrade 100 computers from Windows 98 to Windows 2000 Professional. You use setup manager to create the unattended.txt file. The hardware on each computer is configured identically. You upgrade 10 of the computers. You notice that the monitors on the 10 computers go blank after Windows 2000 Professional loads. You restart one of the computers in Safe Mode, and find that the monitor appears to be working. Which change should you make to unattend.txt to configure your video settings correctly?Click the appropriate line on the Unattend.txt Notepad screen.四 Unattend- NotepadFile Edit Format View HelpsetuTag[Unattendedunattendmode=FullunattendedoenPreinstall=NoTargetPath=C: \\WIN98[Guiunattended]AdminPasswor d=wTImezonea]Productio=114111-113411-114561-111781-15281FullName=AMRAFor gName=AMRAFComputer Name[Display]Bitsperpel=resolution=6oYresolution=480Vrefresh= 150IMassstorat ivers]DEMLOEMBOOFiles][OEM_Ads]setu
[问答题]You are the administrator of a Windows 2000 Professional computer that is shared by several users in the Sales department. User accounts have been created for current users. Current users can log on to the computers. To accommodate new users, you add two new user accounts named User7 and User8 to computer5. When User7 attempts to log on o the computer, she receives the following error message: Windows cannot copy file C:\Documents and Settings\Default User\ to location C:\Documents and Settings\User7. Contact your network administrator. Detail - Access is denied. When User8 attempts to log on to the computer, he receives the same type of error message.You want to allow the two new users, as well as other users in the Sales department, to be able to log on to the computer.Which two methods can you use to accomplish your goal? (Choose two.)A.Add the User7 and User8 user accounts to the DACL for the Profiles shared folder on the network server.B.Add the User7 and User8 user accounts to the DACL for the C:\Documents and Settings\Default User folder.C.Add the Everyone group to the DACL for the C:\Documents and Settings\Default User folder.D.Add a Group Policy object (GPO) for the Sales OU that redirects user profiles to a shared folder.E.Log on by using the local Administrator account and create new folders for User7 and User8 in the C:\Documents and Settings folder.F.Select the allow inheritable permissions from parent to propagate to this object option on the C:\Documents and Settings\Default User folder, and reset the permissions on all child objects.G.Move and retain permissions and compressions.
[问答题]You are installing Windows 2000 Server on a new computer that has a hardware-based RAID array, a floppy disk drive, and a CD-ROM drive. The disk controller for the RAID array is not included on the current Hardware Compatibility List (HCL). You run Windows 2000 Setup by starting the computer from the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 Setup, you receive the following STOP error: INACCESSABLE_BOOT_DEVICE .Which two actions should you take to eliminate the STOP error? (Choose Two)A. Modify the Boot.ini file.B. Restart Windows 2000 Setup by using the Windows 2000 Server CD-ROM.C. Select Safe Mode from the Windows 2000 boot menu.D. Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.E. Install a driver for the RAID controller form. a floppy disk.F. Use Device Manager to update the driver for the RAID controller.
[问答题]You are the network administrator for Ezonexam.com.You need to install Windows 2000 Professional on 75 new computers in your network. You use Setup Manager wizard to configure a fully automated installation script. file. You test the unattended installation using the fully automated installation script. file. When the installation completes you realize that the Windows 2000 Professional CD does not contain the driver for the Plug and Play video adapter used by the new computers.You want to include the correct driver for the video adapter when installing Windows 2000 Professional.What should you do? (Each correct presents part of the solution. Select three.)A.Run sysprep.exe with the -pnp parameter.B.In the UserData section of the fully automated installation script. file, specify the ProductID variable.C.In the Unattended section of the fully automated installation script. file, set the Oem PnP Drivers Path property to the location of the video driver files.D.In the Unattended section of the fully automated installation script. file, set the Oem Preinstall property to Yes.E.Copy the video driver to the i386\$OEM$\$1\VidDriver.F.Copy the video driver to the i386\$$\System32.
[问答题]You are the administrator of a SQL Server 2000 computer. You have two new hard disks on which you will create a database named inventory. You want to insert, update, and delete data as quickly as possible.Which two actions should you take? (Each correct answer presents parts of the solution. Choose two)A. Configure the hard disks as two mirrored NTFS volumes.B. Configure the hard disks as one mirrored NTFS volumes.C. Configure the hard disks as two independent NTFS volumes.D. Configure the hard disks as one extended NTFS volume.E. Place inventory_data.mdf on the first volume and inventory_log.ldf on the second volume.F. Place inventory_data.mdf on the first volume and inventory_data2.ndf and inventory_log.ldf on the second volume.G. Place inventory_data.mdf and inventory_log.ldf on the same volume.
[问答题]You want to install Windows 2000 Professional on 20 new PXE compliant computers, which do not have operating systems installed. You create a RIS image and load the image onto the RIS server and then start the new computers. You find that the new computers cannot connect to the RIS server. You verify that existing client computers on the network can connect to network servers.What should you do? (SELECT AND PLACE)口
[问答题]You are the network administrator for Ezonexam.Ezonexam14 is one of 10 Windows NT Server 4.0 member servers in a Windows 2000 domain named marketing.Ezonexam.local. The marketing domain also has five Windows NT 4.0 backup domain controllers. The marketing.Ezonexam.local domain is the child domain of Ezonexam’s root domain, Ezonexam.local.You want to upgrade Ezonexam14 to Windows 2000 Server and change the role of Ezonexam14 from a member server to a domain controller in the same domain. You also want to be able to implement Universal Groups in the marketing domain.What should you do? (Each correct answer presents part of the solution. Choose three)A. Upgrade all of the Windows NT Server 4.0 member servers in the marketing domain to Windows 2000 Server.B. Upgrade all of the Windows Server 4.0 backup domain controllers in the marketing domain to Windows 2000 Server.C. Upgrade Ezonexam14 to Windows 2000 Server. Run the dcpromo command to make Ezonexam14 a domain controller in the marketing.Ezonexam.local domain.D. Upgrade Ezonexam14 to Windows 2000 Server. Run the dcpromo command to make Ezonexam14 to a domain controller in the Ezonexam.local domain.E. Use the Active Directory Domains and Trusts tool to change the Ezonexam.local domain mode to native mode.F. Use the Active Directory Domains and Trusts to change the marketing.Ezonexam.local domain mode to native mode.
[问答题]You are the network administrator of a small Windows 2000 Active Directory domain Ezonexam.com.The domain contains one shared print device with default settings. An employee named Tess frequently prints high-priority documents that she needs to have immediately.Tess reports missing critical deadlines because of the large number of print jobs ahead of hers in the queue.You need to ensure that Tess’s print jobs are always the next to be printed, regardless of the number of other jobs waiting in the print queue.Which action or actions should you take to achieve this goal? (Choose all that reply)A. Create a new printer on the print server that points to the same print device.B. Create another print port on the print server that points to the same print device.C. In the properties of the new printer, click the Advanced tab and change the priority to 10.D. In the properties of the new printer, change the priority to 1.E. . In the properties of the original printer, click the Advanced tab and change the priority to 10.F. Configure Tess’s computer to use the new printer.G. Configure the Internet Printing Protocol (IPP) Client on Barbara’s computer.
[单选题]Your Windows 2000 Server computer named EzonexamSrv contains a single 18-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:Boot disk or operating system not found.You use Recovery Console to discover that the files on partition C are corrupted.You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.What should you do?A.Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.B.Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.C.Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.D.Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.
[单选题]You work as one of ten network administrators at theBostonoffice of Ezonexam.com.The Ezonexam.com network includes Windows 2000 Professional client computer, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Ezonexam employees who use the Windows operating systems stores files on a shared folders on a Windows 2000 Server computer that is named EzonexamFileServerA.You are now required to make the shared folders on EzonexamFileServerA available for the Ezonexam staff that uses UNIX computers.What action should you take?A.Install and configure NFS (Network File System) on EzonexamFileServerA.B.Configure data volumes on EzonexamFileServerA to be FAT volumes.C.Disable Server Message Block (SMB) signing on EzonexamFileServerA.D.Install Simple TCP/IP Services on EzonexamFileServerA.
[多选题]You are the network administrator for Ezonexam. You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a shared folder called I386 on a Windows 2000 Server computer named Ezonexam1.What should you do? (Each correct answer presents part of the solution. Choose two)A.On a Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B.On a Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, and Ntbootdd.sys to this disk. Start the new computer by using the disk.C.Start the new computer by using a Windows 98 network boot disk.D.Connect to \\Ezonexam1\I386 and run Winnt32.exe.E.Connect to \\Ezonexam1\I386 and run Winnt.exe.
[单选题]Ezonexam.com’s network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.What should you do?A.Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.B.Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.C.Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.D.On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.
[单选题]You are an administrator of Ezonexam.com’s network. You want to perform. routine upgrades on your Windows 2000 Server computer. You use your non-administrator user account in the domain to logon to the server.You want to upgrade all of the critical system files and patches on the server in the shortest possible time.What should you do?A.Use Windows Update.B.Run System File Checker.C.Log on as administrator and run Windows Update.D.Log on as administrator and run System File Checker.
[单选题]You are the network administrator for Ezonexam. You are planning to upgrade Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You want to install a custom application as part of the upgrade.You need to include the necessary commands so that the custom application is automatically installed as part of the upgrade process.What should you do?A.Create a command file named Cmdlines.txt to install the application. Copy the Cmdlines.txt file to the subfolder named $OEM$ under the i386 folder.B.Create a command file named Unattend.txt to install the application. Copy the Unattend.txt file to the subfolder $OEM$\textmode under the i386 folder.C.Create a subfolder named $OEM$\$C\Applications under the i386 folder. Copy the application files to that subfolder.D.Create a second network shared folder named $OEM$. Copy the application to that share point.
[单选题]You are the administrator for Ezonexam.com’s network.Your network includes Windows 2000 Professional client computers, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Users of the Windows operating systems store files on shared folders on a Windows 2000 Server computer named FileServ.You want to make the shared folders on FileServ available to the UNIX computers.What should you do?A.Install and configure Network File System (NFS) on FileServ.B.Configure data volumes on FileServ to be FAT volumes.C.Disable Server Message Block (SMB) signing on FileServ.D.Install Simple TCP/IP Services on FileServ.
[单选题]You are the administrator of a database that contains 64 lookup tables. These tables store static data that should not change. However, users report that some of this data is being changed. You need to prevent users from modifying the data.You want to minimize changes to your security model and to your database applications. How should you modify the database?A.Create a filegroup named LOOKUP. Move the lookup tables to this filegroup. Select the read only check box for the filegroup.B.Create a database role named datamodifier. Grant SELECT permissions to the datamodifier role. Add all users to the role.C.Deny INSERT, UPDATE, and DELETE permissions for all users. Create stored procedures that modify data in all tables except lookup tables. Require users to modify data through these stored procedures.D.Create a view of the lookup tables. Use the view to allow users access to the lookup tables.
[单选题]You are the administrator of a Windows 2000 Server computer. A folder named HR-Data on the system partition of the server is shared on the network as HR-Data. The owner of the HR-Data folder is Administrators.The shared permissions and NTFS permissions are shown in the following table.Share permissions:Everyone: FULL ControlNTFS permissionsDomain Admins: ReadKatrin: Full ControlKatrin creates a file in the HR-Data folder. She sets the NTFS permissions for the file to list only herself on the access control list, with Full Control permission. Katrin then leaves on vacation and cannot be contacted.Later, you discover that the file contains sensitive information and must be removed from the server as soon as possible. You want to delete the file without modifying any of the permissions for other files in the HR-Data folder. You want your actions to have least possible impact on users who may be using other files in the HR-Data folder. You want to use the minimum amount of authority necessary to delete the file.What should you do?A.Grant yourself Full Control permission for only the HR-data folder and not its subobjects. Delete the file. Then remove Full Control permission for HR-Data folder.B.Take ownership of the HR-Data folder. When prompted, take ownership of the existing files. Grant yourself Full Control permission for the file. Delete the file.C.Take ownership of the file. Grant yourself Modify permission for the file. Delete the file.D.Grant yourself Modify permission for the HR-Data folder and its subobjects. Delete the file. Then remove Modify permission for the HR-Data folder.
[单选题]You are the administrator of a Windows 2000 Server computer at Blue sky Airlines. You onfigure a server named print10.marketing.blueskyairlines.local as a print server at the Los Angeles site. You create and share a variety of printers on the server for use by employees in the arketing.blueskyairlines.local domain.You want to review the configured properties of all the shared printers on the rint10.marketing.blueskyairlines.local server. You want to perform. this review from a Windows 2000 Professional computer at theLondon site of Blue sky Airlines.What should you do?A.Use your web browser to connect to http://print10.marketing.blueskyairlines.local/printers.B.Use your web browser to connect to http://print10.blueskyairlines.local/printers.C.Run the net view\\print 10 command.D.Run the net view\\print 10.blueskyairlines.com command.
[单选题]You want to improve the TCP transmission speed of a Windows 2000 Server computer. You also want to remove an unused registry key. You use Regedt32 to edit the registry of the Windows 2000 Server. You insert a value in the registry named TCPWindowSize, and you remove the unused key. You restart the computer, but the computer stops responding before the logon screen appears.You want to return the computer to its previous configuration. What should you do?A.Restart the computer in Safe Mode. Then restart the computer again.B.Restart the computer by using the Recovery Console. Run the Fixboot c: command, and then run the Exit command.C.Restart the computer by using the Recovery Console. Run the enable winlogon service_auto_start command, and then run the Exit command.D.Restart the computer by using the last known good configuration.
[单选题]You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer.Your Windows 2000 Professional client computer can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit.Connect to PrinterThe server on which the printer resides doesnot have a suitable HP Laser Jet4 printerdriver installed, Click on OK if you wish toinstall the driver on your local machineCancelYou want the printer driver to install automatically on the Windows NT Workstation computers. What should you do?A.Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on all Windows NT Server 4.0 computers still configured as BDCs.B.Copy the Windows NT 4.0 printer drivers to the Netlogon shared folders on the PDC emulator.C.Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000.D.Copy the Windows NT 4.0 printer drivers to the Winnt\System32\printers\drivers folder on the Windows 2000 print Server.
[单选题]You are the administrator of a Windows NT Server 4.0 computer names Ezonexam1.Ezonexam1 is a backup domain controller in Ezonexam.com’s Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disks 0 and 1 are configured as a Windows NT 4.0 mirror set and contain the operating system files. There are 300 MB of disk space remaining on the Windows NT 4.0 mirror set. Disk 2, 3, and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and currently has 15 GB free. Ezonexam1 runs an application that is used by all of Ezonexam.com’s employees.A new version of the application is available. The new version requires Windows 2000 Server. The application will not run on a domain controller.You need to install the new application on Ezonexam1 as quickly as possible.What should you do first?A.Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.B.On a second Windows 2000 Server computer, run the sysprep utility to create a cloned server image. Use this image to upgrade Ezonexam1.C.Upgrade Ezonexam1 to be a Windows 2000 member server. After the upgrade, run the dcpromo utility on Ezonexam1.D.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.
[单选题]You are the network administrator responsible for testing and deploying new service packs for Windows 2000. Your forest has two trees, with four domains in each tree, as shown in the exhibit.For the testing of each service pack, you plan to deploy the service pack to the support.IS.contoso.com domain and the support.IS.litware.com domain, but to no other domains. You plan to use a Group Policy to configure and administer the service pack package. You need to minimize the complexity and administration of the service pack package, and to minimize network traffic between the domains.You create a Microsoft Windows Installer package for the service pack. What should you do to configure the Group Policy litware.comcontoso.comIS. litware comfinance.litware.comIS contoso. comupport.is.litware.comsupportis.contoso.comdevelopment.is.contoso.comA.Configure the Windows Installer package in a Group Policy for the litware.com and contoso.com domainsB.Configure the Windows Installer package in a Group Policy for the support.IS.litware.com and support.IS.contoso.com domains.C.Configure two sites, with one tree in each site. Configure the Windows Installer package in a Group Policy for each site.D.Configure one site that contains both trees. Configure the Windows Installer package in a Group Policy for the site.
[单选题]You are the administrator of a SQL Server 2000 computer. Each evening after business hours, you perform. database maintenance tasks. You create a Data Transformation Services package to populate the data warehouse. MAPI is not installed on the server.You want to schedule the DTS package to run each night. You want to attend to other duties while the DTS package is executing. You also want to be notified if the DTS package fails.What should you do?A.Select the DTS packages log package execution to SQL server check box. Create a SQL server event alert to notify you if the package fails.B.Select the DTS packages write completion status to event log check box. Create a SQL server event alert to notify you if the package fails.C.Configure the DTS package to include an on failure precedence constraint and a send mail task. Configure the send mail task to notify you if the package fails.D.Configure the DTS package to include an on failure precedence constraint and a send mail task. Configure the execute process task to execute a not send command that will notify you if the package fails.
[单选题]You are the system administrator for an electronics manufacturing company. The accounting department uses Windows 98 computers. The department has purchased a third-party spreadsheet application that only runs on Windows 2000 Professional. You need to upgrade the computers to Windows 2000 Professional and install the new application. You choose an unattended installation method for both the operating system and the application.The Windows 2000 Professional installation files reside on a server named Ezonexamsrv in a shared folder named W2Ksource. You place the installation files for the spreadsheet application in \\Ezonexamsrv\W2Ksource\i386\$OEMS$. You create an answer file named Acctanswer.txt and place it in \\Ezonexamsrv\W2Ksource.You map drive letter H: to \\Ezonexamsrv\W2Ksource and begin the installation on a test computer by running the winnt32 /s:H:\i386 /u:H:\acctanswer.text command.Windows 2000 Professional is installed successfully. However, the spreadsheet application is not installed. You want to ensure that the spreadsheet application is installed during the unattended installation.What should you do?A.Run thewinnt /s:H:\i386 /u:H:\acctanswer.txtcommand instead of thewinnt32 /s:H:\i386 /u:H:\acctanswer.textcommand.B.Move the spreadsheet application installation files to \\Ezonexamsrv\W2Ksource\i386, and then run thewinnt/s:H:\i386 /u:H:\acctanswer.txtcommand.C.Edit the[Unattended]section of the answer file to contain the parameterOemPreinstall = Yes, and then run thewinnt32 /s:H:\i386/u:H:\acctanswer.txtcommand.D.Rename Acctanswer.txt to Unattend.txt, and then run thewinnt32 /s:H:\i386 /u:H:\unattend.txtcommand.
[单选题]You need to install Windows 2000 Professional on 35 new computers on the company LAN.First, you create a distribution folder on the network server. Then you create a network boot disk to install Windows 2000 Professional from the distribution folder.Now you need to create a batch file, which the network boot disk will execute to start the installation. You must specify a source path and temporary drive for the installation files.You also need to install the accessibility options within the batch file. The batch file must execute a hardware-specific application to run after the GUI-mode Setup has completed.Which command must you specify in the batch file A.Z:\i386\winnt /s:z:\i386 /t:d: /a /e:z:\hardware\setup.exeB.Z:\i386\winnt /s:z:\i386 /rwinnt.tmp /a /e:z:\hardware\setup.exeC.Z:\i386\winnt32 /s:z:\i386 /tempdrive:d /cmd:z\hardware\setup.exeD.Z:\i386\winnt32 /s:z:\i386 /cmdcons:z:\hardware\setup /makelocalsource
[多选题]You are the network administrator for Ezonexam.com.You need to upgrade a computer from Windows NT Server 4.0 to Windows 2000 server. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the installation of the Windows 2000 Server operating system.During the text portion of the installation, you receive the following error message:Stop 0x00000078 Inaccessible_boot_device.You want to successfully upgrade the computer.What should you do? (Each answer presents part of the solution. Choose two)A.Start the computer by using a DOS disk and run FDISK.B.Update the firmware on the RAID controller.C.Restart the installation. During the text-mode setup-mode setup, press F6.D.Restart the installation. During the text-mode setup, create a new partition.E.Insert a floppy disk containing the OEM SCSI driver and specify the additional driver.
[单选题]You are the administrator of two SQL Server 2000 computers. One of these servers contains a 4-GB database named marketing. You want to remove the marketing database from one server and add it to the other as quickly as possible.What should you do?A.Detach the database from the original server by using the sp_detach_db stored procedure. Copy the database and the transaction log files to the new server, and attach them by using the sp_attach_db stored procedure.B.Use the DTS export wizard to transfer all database objects from the original server to the new server. Drop the database from the original server.C.Run a full backup of the database on the original server. Create a new database named marketing on the new server. Restore the backup in the new marketing database. Drop the database from the original server.D.Shut down the original server. Copy the database and the transaction log files to the new server. Use the DISK INIT and DISK REFIT statements to attach the data file to the new server. Drop the database from the original server.
[单选题]You are the administrator of a network that consists of Windows 2000 Server Computers and Windows 2000 Professional computers.You want to configure the deployment of the most recent Windows 2000 Service pack so that users of the Windows 2000 Professional Computers receive the service pack automatically when they log on to the domain.What should you do?A.Create a Microsoft Windows installer package for the service pack. Configure RIS to use the package.B.Create a Microsoft Windows installer package for the service pack. Configure the package in a group policy.C.Create a Microsoft Windows installer package for the service pack. Configure the package in the local computer policy.D.Place the service pack in a distributed file system (Dfs).
[单选题]You are the database administrator for an accounting company. You are installing SQL Server 2000 on a new Microsoft Windows 2000 Server computer. The computer will run two client/server database applications that your company has purchased. Each application uses a separate database.During the installation, you specify SQL_Latin1_General_CP1_CI_AI as the default collation for the SQL server computer. After completing the installation, you discover that one of the new applications, named Financials, is sorting information incorrectly.You contact the application vendor and discover that the Financials application requires the SQL_Latin1_CP437_BIN collation. You need to configure the correct collation for the applications without diminishing the performance of the SQL Server computer.What should you do?A.Rerun the SQL Server Setup and specify the SQL_Latin1_General_CP437_BIN collation.B.Run the rebuildm utility and specify the SQL_Latin1_General_CP437_BIN collation.C.Use the ALTER DATABASE statement to specify the SQL_Latin1_General_CP437_BIN collation for the Financials database.D.Use the ALTER TABLE statement to specify the SQL_Latin1_General_CP437_BIN collation for each table in the Financials database.
[单选题]You configure a Group Policy Object for the Marketing organizational unit (OU) to prevent users from accessing My Network Places and from running System in Control Panel. You want the Managers domain local group to be able to access My Network Places, but you still want to prevent them from running System in Control Panel.What should you do?A.Add the managers group to the access control list of the GPO. Disable the permission of the managers group to read and apply the group policy.B.Add the managers group to the access control list of the GPO. Deny the permission of the managers group to read and apply the group policy.C.Create a second GPO in the OU. Add the managers group to the access control list. Allow the managers group to apply the group policy. Deny the authenticated users group permission to read and apply group policy. Configure the new GPO to deny the ability to run System in Control Panel. Give the original GPO a higher priority than the new GPO.D.Create a second GPO in the OU. Add the managers group to the access control list. Allow the managers group to read and apply the group policy. Disable the permission of the authenticated user group to read and apply the group policy. Configure the new GPO to allow access to My Network Places. Give the new GPO a higher priority than the original GPO.
[单选题]You are the network administrator for Ezonexam.Your Windows 2000 Server computer named Ezonexam1 contains two 36-GB hard disks. Disk 0 and Disk 1. Each disk is configured as a basic disc and has a single 36-GB NTFS partition. Both partitions are backed up to a tape each night. The partition on Disk 1 stores user data. Most users at Ezonexam encrypt their files. Disk 1 fails. You replace it with a new hard disk and create a single NTFS partition.You need to recover the data as quickly as possible while maintaining the security of the files on Disk 1.What should you do?A.Restore the contents of Disk 1 from the most recent tape backup to a second file server. Instruct users to copy their files from the second file server to the new partition.B.Restore the contents of Disk 1 from the most recent tape backup to a second file server. Log on to Ezonexam1 console as a recovery agent. Copy the files from the second file server to the new partition.C.Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Instruct the users to verify the integrity of their files.D.Restore the contents of Disk 1 from the most recent tape backup to the new partition on Ezonexam1. Run the cipher command to decrypt the files.
[多选题]You are the network administrator for Ezonexam.You are planning to upgrade Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You need to install a custom application as part of the upgrade.You need to include the commands necessary so that the custom application is installed as part of the upgrade process.What should you do? (Each correct answer presents part of the solution. Choose two)A.Create a command file named Unattend.txt to install the application.B.Create a command file named Cmdlines.txt to install the application.C.Copy the command file to the \$OEM\$C\ subfolder under the i386 folder.D.Copy the command file to the subfolder named \$OEM$ under the i386 folder.E.Copy the command file to the subfolder named \$OEM$\textmode under the i386 folder.
[单选题]You are the administrator of several SQL Server 2000 computers. You want to retrieve information from an archived inventory database. You have a full tape backup of the database. The backup’s header information shows that the backup uses the SQL_Latin1_General_CR437_BIN collation.However, the existing SQL server computers in your office are configured to use theSQL_Latin1_General_CP1_CI_AS collation.You do not want to join tables in the inventory database with tables in other databases. You need to restore the inventory database to a SQL Server 2000 computer by using the least amount of administrative effort.What should you do?A.Use the rebuildm utility to rebuild the system database on an existing SQL server computer. Configure all the databases on that server to use the SQL_Latin1_General_CR437_BIN collation. Restore the inventory database to the server.B.Restore the inventory database to an existing SQL server computer. Accept the SQL_Latin1_General_CR437_BIN collation for that database.C.Install a new named instance of SQL Server 2000 on an existing SQL Server 2000 computer. Configure the named instance to use the SQL_Latin1_General_CR437_BIN collation. Restore the inventory database to the named instance.D.Install SQL Server 2000 on a new computer. Configure the new server to use the SQL_Latin1_General_CR437_BIN collation. Restore the inventory database to the new server.
[单选题]You are the administrator of SQL server 2000 computer. The server contains a database named MedicalRecords. Users access medical records by using the PatientID field. This field is the clustered primary key for the Patients table. When users try to access medical records, the database responds slowly. You examine the database options as shown in the exhibit.MedicalRecords PropertiesGeneral Data Files Transaction Log Filegroups Options Permissions IAccess厂 estrict accessC Members of db owner, dbcreator, or sysadminC Single userModelSettings厂ANS| nulL defaull厂 Auto close厂 Recursive triggers厂 Auto shrink厂 Auto update statisticsv Auto create statisticsV Torn page detection厂 Use guoted identifierDatabase compatibility level 80KCancelHelpYou want to accelerate query response time and minimize administrative overhead. How should you reconfigure the database?A.Create a SQL Server Agent job to execute the UPDATE STATISTICS statement, and schedule the job to run weekly.B.Select the Auto Update Statistics check box.C.Run the database maintenance plan wizard, and accept the default settings.D.Rebuild the primary key as a nonclustered primary key.E.Clear the Auto Create Statistics check box.
[单选题]server’s msdb database in an e-mail message to the administrator of another SQL Server computer.You create a job that contains the following steps:--Detach the msdb database--Send the database to the administrator in an e-mail message--Reattach the msdb databaseYou test the job, and it fails on the first step. You need to ensure that the msdb database is mailed to the administrator every night.What should you do?A.Ensure that the SQLServerAgent service is running under a user account that has database owner access to the msdb databaseB.Delete the first and last steps in the jobC.Configure the job to back up the msdb database to a temporary file. Send the file to the administrator in an e-mail messageD.Insert a new job step before the first step. Configure the new step to terminate all processes that use the msdb database
[单选题]You are the administrator of a SQL Server 2000 computer. You create several jobs on the server and schedule them to run during the evening.You configure an operator on the server and configure the jobs to send an e-mail to this operator if a job fails for any reason.While testing the jobs, you discover that e-mail messages are not being sent to the operator when a job fails. You use SQL Server Enterprise Manager to confirm that SQL Mail is started.You need to ensure that e-mail messages are sent to the operator whenever a job fails. What should you do?A.Configure SQLAgentMail to use a valid MAPI profileB.Configure SQL Mail to use a mailbox that delegates permissions to the operatorC.Use the net send notification method to send the operator e-mail messagesD.Create a job that executes the xp_startmail stored procedure Configure the job to run whenever SQL Server 2000 starts
[单选题]Your Windows 2000 Server computer has a 10-GB hard disk with two partitions: Drive C and drive D. Windows 2000 Server is installed on Drive D. Both partitions are formatted as NTFS. Your office experiences a power failure that causes your Windows 2000 Server computer to restart.When the computer is restarting, you receive the following error message NTLDR is missing. Press any key to restart.What should you do?A.Start the computer by using Windows 2000 Server computer CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system partition.B.Start the computer in debugging mode. Copy the NTLDR file on the CD-ROM to the root of the system partition.C.Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt, run the sfc/scanboot command.D.Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
[单选题]Your company network includes 6,000 Windows 2000 Professional client computers and 35 Windows 2000 Server computers in a single domain.Your company has a print device that is used to print payroll checks. The print device is physically attached to the parallel port of one of the client computers. This print device’s tray is loaded with checks at all times. You have shared this printer on the network as ChkPrinter and retained the default permissions.A payroll application runs on a server named HRserv. Every Wednesday at 5:00P.M, the application prints paychecks from employees on this printer. The payroll application runs as a Windows 2000 service on HRserv.You need to configure ChkPrinter so that only the payroll application will be able to use the printer.What should you do?A.Configure the share name for ChkPrinter to be ChkPrinter$. Configure the payroll application to print to this new share name.B.Configure ChkPrinter so that it is available only from5:00 P.Mto5:30 P.MC.Configure ChkPrinter to allow the HRserv domain account print permissions for ChkPrinter. Remove print permissions for the Everyone group.D.Configure ChkPrinter to allow all HRserv domain accounts Print permissions for ChkPrinter. Change the permissions to deny print on ChkPrinter for the Everyone group.
[单选题]You are the administrator of a SQL Server 2000 database. Using the default options configures the database. You drop indexes to facilitate a large import of data, and rebuild them after the import is complete.Users report that response times from a stored procedure have become slower. In the stored procedure, you examine the following code.CREATE PROCEDURE GetCustomer( @CustomerID Int )ASSELECT FirstName, LastName, Address1, Address2, City,State, Zip, MAX(PurchaseDate) AS LastPurchaseFROM Customers CJOIN Addresses A ON A.AddressID = C.AddressIDJOIN Purchases P ON P.CustomerID = C.CustomerIDWHERE C.CustomerID = @CustomerIDGROUP BY FirstName, LastName, Address1, Address2, City, State, ZipYou want to improve the performance of the procedure by using the least amount of administrative effort. What should you do A.Recompile the stored procedure.B.Update the database statistics.C.Check the consistency of the database and repair errors.D.Create a view and modify the stored procedure to use the view.
[单选题]The company is buying 50 identical computers to run Windows 2000 Server in these offices. These servers must be installed to the company’s standard configuration. You create a setup information file (SIF) that specifies the company’s standard configuration.You want to automate the installation process as much as possible in the least possible amount of time.What should you do?A.Use Makebt32.exe to create four installation startup disks and add the SIF to the first disk. Instruct an employee at each office to start the installation by using these disks.B.Create an MS-DOS boot disk that contains CD ROM drivers and the SIF and that runs the Winnt/S: D:\i386 command. Instruct an employee at each office to start the installation by using this disk.C.Create a floppy disk that contains only the SIF. Instruct an employee at each office to start the installation by using the Windows 2000 Server CD-ROM, with the floppy disk inserted.D.Create a Windows 2000 folder on a hard disk. Copy the Windows 2000 Server CD-ROM to the folder. Add the SIF to the folder. Copy the folder to a writable CD. Instruct an employee at each office to start the installation by using this CD.
[单选题]Ezonexam has 50 offices. The employees in these offices have limited knowledge of Windows 2000. Each office has a network of between five and 20 client computers. The office networks are connected to each other. The company is buying 50 identical computers to run Windows 2000 Server in these offices. The server must be installed to the company’s standard configuration. You use Setup Manager to create a network shared distribution folder and a Unattend.txt file that specifies the company’s standard configuration.You want to automate the installation process as much as possible, in the least possible amount of time.What should you do?A.Run Makebt32.exe to create four installation startup disks and add the Unattend.txt file to the first disk. Instruct an employee at each office to start the installation by using these disks.B.Create a Microsoft MS-DOS network boot disk that makes a connection to the network shared distribution folder and runs the winnt command with the /s and /u switches. Instruct an employee at each office to start the installation by using this disk.C.Create a floppy disk that contains only the Unattend.txt file. Instruct an employee at each office to start the installation by using the Windows 2000 Server compact disc, with the floppy disk inserted.D.Create a Windows 2000 folder on a hard disk. Copy the Windows 2000 Server compact disc to the folder. Add the Unattend.txt file to the folder. Copy the folder to a writeable CD. Instruct an employee at each office to start the installation by suing this CD.
[单选题]You are the administrator of your company’s network. A user named Lilly prints dozens of documents daily from her Windows 2000 Professional computer. Lilly reports that she receives a dialog box announcing that each print job she sends has printed successfully.Lilly’s default printer is a shared printer that is connected to Windows 2000 Server computer. She wants to have this notification turned off because she prints so many documents.What should you do?A.In the server properties of the printer system folder, clear the Notify when remote documents are printed option.B.In the server properties of the printers system folder, clear the Notify computer, not user, when remote documents are printed option.C.In the default printer properties, select the Portstab, and clear the Enable bidirectional support option.D.In the default printer properties, select the Advancedtab, and clear the Advanced printing features option.
[单选题]You are the administrator of a SQL Server 2000 computer. You are creating a data transformation services package. As the first step in this process, you need to load data from text files into a database table. These text files contain data on new stores that join your franchise. The text files list the data columns in the following format StoreID, StoreName, Address, City, State, PostalCode, ManagerID, StoreTypeID, FacilityID.The destination table is configured as shown in the exhibit.stores8StoreIDstoreNameaddresscitystatepostalCodeYou want to load the data into the table as quickly as possible. What should you do?A.Use a Bulk Insert Task to read the data into a temporary table. Use an Execute SQL task to import the appropriate data into the destination table.B.Create and edit a format file to select the columns you want to import. Use a Bulk Insert Task, and then specify the format file to import the appropriate data into the destination table.C.Use a transform. data task to import the data. Use Microsoft ActiveX transformation scripts to write the appropriate data to the appropriate columns in the destination table.D.Create and edit a format file to select the columns you want to import. Use a transform. data task, and then specify the format file to import the appropriate data into the destination table.
[单选题]One of the file servers in the domain is a Windows 2000 Server computer named Ezonexamfiles.Ezonexamfiles contains a shared folder named Accounting, which is used to store data for the companys accounts payable department.The permissions on the Accounting folder are configured as shown in the following table.Type of permissions AccountaPermissionsSharedAcctPay domain: local, groupd FullNTESEveryone¤FullControloMr. King is an employee in the operations department. He uses a Windows 2000 Professional client computer. His manager requests that King be granted access to the files in the Accounting folder.You add Kings user account to the AcctPay domain local group, but he still cannot access the files in the Accounting folder.You need to ensure that King can access the files. What should you do?A.Instruct King to log off his computer and log on again.B.Move Kings user account to the same Active Directory organizational unit (OU) as Ezonexamfiles.C.Modify the NTFS permissions on the Accounting folder to grant King Full Control permissions.D.Modify the NTFS permissions on the Accounting folder to grant the AcctPay domain local group Full Control permission.
[单选题]You are the administrator of a 12 SQL Server 2000 computers. These servers are located in company offices throughout the world.You configure a multiserver job on the server in your company’s New York City office. You configure this server as a master server, and designate the remaining 11 servers as target servers.After the job completes successfully, you decide to set up a new SQL Server 2000 computer as the master server. The new server will be named JobMaster and the other 12 servers will be target servers.You need to make the New York City server a target server instead of a master server. What should you do?A.On the New York City server, defect all 11 target servers. On the JobMaster server, enlist the 12 servers as target servers.B.On the JobMaster server, enlist all other servers as target servers.C.On the New York City server enlist the JobMaster server as a target server. Transfer the multiserver jobs from the New York City server to the JobMaster server.D.On the JobMaster server, enlist the New York City server as a target server. On the JobMaster server, enlist the other 11 servers as target servers. On the JobMaster server, defect the New York City server.
[单选题]You are the administrator of SQL Server 2000 computer named FABSQL2K01. You create a Data Transformation Services package that contains definition for two transform. data tasks.The tasks gets data from two text files named Customers and Sales. The DTS package is configured as shown in the exhibit.You do not want the DTS package to add any data to the server unless both transform. data tasks complete successfully.You select the use transactions check box of DTS package and the Join transaction of present check box of both transform. data tasks. You then select the fail package on step failure check box of both transform. data tasks.You want to use the DTS package to import data from the text files to the server. You want to ensure that changes are committed if all imported data is successfully transformed.目stomersFABSQ_2K01-1FABSQL2KO1-2SalesWhat should you do?A.Select the commit on successful completion check box of the DTS package.B.Select the commit transaction on successful completion of this step check box of the customers transform. data task.C.Select the commit transaction on successful completion of this step check box of the sales transform. data task.D.Select the commit transaction on successful completion of this step check box of both transform. data tasks.
[单选题]Your network consists of numerous domains within a LAN, plus one remote location that is configured as another domain within the tree. Each domain contains several organizational units. The remote domain is connected to the main office network by using 56-Kbps connection, as shown in the Exhibit.56 Kbpslitware. comfinance. litware comwestlitware.comIs.litare.comsupportIs.litware.comThe remote location is running a previous service pack for Windows 2000, and the LAN is running the most recent service pack.You want to configure a group policy for the remote location so that users can repair a problem with a service pack system file. You also want to reduce the traffic on the LAN and ease administration of the group policies. You want to retain the domain administrators access to the group policy configuration.What should you do?A.Configure a group policy for each OU in the west.litware.com domain. Configure a service pack software package for each group policy.B.Configure a group policy for each OU in the litware.com domain. Configure a service pack software package for each group policy.C.Configure a group policy for west.litware.com domain. Configure a service pack software package for the group policy.D.Configure a group policy for the litware.com domain. Configure a service pack software package for the group policy.
[单选题]You are the administrator of a SQL server computer. The server is running SQL Server 6.5 and SQL Server 7.0.You install a named instance of SQL Server 2000, and then run the SQL server upgrade wizard. On the database selection screen, some of the SQL Server 6.5 databases are not listed.You cancel the SQL Server upgrade wizard.You need to ensure that the SQL Server 6.5 databases are listed in the wizard. What should you do?A.Uninstall SQL Server 7.0, and then rerun the SQL Server upgrade wizard.B.Run the Microsoft SQL Server-switch application, and then rerun the SQL Server upgrade wizard.C.Create a data transformation services package that imports the databases from SQL Server 6.5 to SQL Server 2000, and then execute the package.D.Uninstall SQL Server 2000, and then reinstall SQL Server 2000 as the default instance.
[单选题]Your network uses TCP/IP as the only network protocol. Devices on the network are configured to use IP addresses from the private 10.0.0.0 range. All the client computers on the network use Windows 2000 Professional. The network includes Windows 2000 Servers and UNIX Servers.Users’ print jobs are sent to shared printers on a Windows 2000 Server computer named PrintServ that directs the print jobs to the print devices attached directly to the network.You have a high-capacity print device that is attached to one of the UNIX Servers. The UNIX computer uses the LPR printing protocol, and its IP address is 10.1.1.99. The name of the printer queue is GIANT.You want users to be able to connect to this printer from their computers.What should you do?A.Install Microsoft Print Services for UNIX on PrintServ. Create a network printer on the users’ computers, and specify that the printer URL is LPR://10.1.1.99/GIANT.B.Install Microsoft Print Services for UNIX on the users’ computers. Create a network printer on the users’ computers, and specify that the printer URL is LPR://10.1.1.99/GIANT.C.Create a network printer on PrintServ and specify that the printer name is \\10.1.1.99\GIANT. Share this printer and connect to it from the users’ computers.D.Create a local printer on PrintServ. Create a new TCP/IP port for an LPR server at address 10.1.1.99 with a queue name of GIANT. Share this printer and connect it from the users’ computers.
[单选题]You are the administrator for your companys network. The network is configured as shown in the exhibit.indows 2000 ServerActive DirectoryRIS ServerDNS Server10.10.30.2010.103020010.103022210.103022RouterYou want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A.Add a Windows 2000 Server computer running WINS to the network.B.Add a Windows 2000 Server computer running DHCP to the network.C.Add the domain Everyone group to the RIS OS image security settings.D.Place the new computers on the same segment as the RIS server.
[多选题]You are the administrator of two Microsoft Windows 2000 computers. One computer is running Internet Information Services (IIS), and the other is running SQL Server 2000. Company partners need to connect by means of the Internet and query data stored on the SQL Server computer. Some of these partners have computers that do not use Microsoft operating systems or Web browsers.You need to configure the IIS and SQL Server 2000 computers to allow access to data by means of the IIS virtual directory. IIS uses Basic Authentication to allow access to the virtual directory.Only company partners should have access to the SQL Server computer by means of the Internet. The partners should not be allowed to make ad hoc queries. You want to be able to audit successful and failed logins to the SQL Server computer.You want to allow the partners access to the SQL Server computer while keeping your security scheme as simple as possible. Which two actions should you take? (Each correct answer represents part of the solution. Choose two.)A.Configure the IIS virtual directory to allow URL queries.B.Configure the IIS virtual directory to allow template queries.C.Create a new Windows user account. Create a corresponding Windows Authenticated login on the SQL Server computer. Configure the IIS virtual directory to always use this login when connecting to the SQL Server computer.D.Create a Windows Authenticated login on the SQL Server computer for the IIS Internet Guest Account. Configure the IIS virtual directory to always use the Internet Guest Account when connecting to the SQL Server computer.E.Create a Windows Authenticated login for each company partner on the SQL Server computer. Configure the IIS virtual directory to use Windows Integrated Authentication when connecting to the SQL Server computer.
[单选题]You are the administrator of a SQL Server 2000 computer. The server contains confidential information about contracts on which your company has placed bids.Company policy requires that bid information be removed permanently from the database one year after the bid closes. You need to comply with this policy and minimize server overhead.What should you do?A.Create a Data Transformation Services (DTS) package to remove bids that have a closing data older than one year.B.Create a trigger to delete any bids that have a closing data older than one year. Bind the trigger to the bids table for all INSERT, UPDATE, and DELETE events.C.Create a stored procedure to delete any bids that have a closing data order than one year. Use SQL server agent to schedule the stored procedure to run every night.D.Create a view that contains a WHERE clause to exclude bids that have a closing date older than one year.
[单选题]You are installing Windows 2000 Server on a multiprocessor computer. The manufacturer has provided a customized Hardware abstraction layer (HAL) to use with the computer. The customized HAL is on a floppy disk.You want to install the customized HAL designed for the computer. What should you do?A.During the text mode portion of the Windows 2000 setup, install the customized HAL.B.After the text mode portion of Windows 2000 Setup is complete, use the Recovery Console to copy the customized HAL to the system32 folder on the boot partition, and then continue Windows 2000 SetupC.After the text mode portion of windows 2000 Setup is complete, use the Emergency Repair process to replace the existing HAL with the customized HAL, and then continue the windows 2000 Setup.D.After the Windows 2000 Setup is complete, use Device Manager to scan for Hardware changes. When prompted, install the customized HAL.
[单选题]You are the administrator of a network that consists of a single Windows NT 4.0 domain. The network contains five Windows NT Server domain controllers and 1,000 Windows NT Workstation client computers.You want to install Windows 2000 Server on a new computer. You want the new computer to act as domain controller in the existing domain.What should you do?A.On the new computer, install Windows NT Server 4.0 and designate the computer as a BDC in the existing domain. Promote the computer to the PDC of the domain. Upgrade the computer to Windows 2000 Server.B.On the new computer, install Windows NT Server 4.0 and designate the computer as a PDC in a new domain that has the same NetBIOS name as the existing Windows NT domain. Upgrade the computer to Windows 2000 Server. Use the Active Directory sites and services to force synchronization of the domain controllers.C.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory, specifying the same NetBIOS name for the Windows 2000 domain as the existing Windows NT domain. Restart the Windows NT PDC on the network and demote it to a BDC.D.Shut down the PDC of the existing Windows NT domain from the network. On the new computer, install Windows 2000 Server, and then run the Active Directory installation wizard to install Active Directory as a replica in the existing Windows NT domain. Promote the new computer to the PDC of the domain. Restart Windows NT PDC on the network and demote it to a BDC.
[单选题]You are the database administrator of a SQL Server 2000 computer. The server contains your company’s Accounts database. Hundreds of users access the database each day.Because you have had power interruptions in the past, you want to perfect the physical integrity of the Accounts database. You do not want to slow down server operations.What should you do?A.Enable the torn page detection database option for each database.B.Disable write caching on all disk controllers.C.Ensure that write caching disk controllers have battery backups.D.Create a database maintenance plan to check database integrity and make repairs each night.
[单选题]You want to upgrade a Windows NT Server 4.0 computer to Windows 2000 Server. The system partition uses the FAT file system.You start the Setup program by starting the computer from the Windows 2000 Server CD-ROM.However, you receive the following error message, You chose to install Windows 2000 on a partition that contains another operating system. Installing Windows 2000 on this partition might cause the operating system to function improperly.You are unable to perform. the upgrade. What should you do to resolve the problem?A.Convert the system partition to NTFS.B.Disable Advanced Configuration and Power Interface (ACPI) support for the computer.C.Restart the computer, and then run Winnt32.exe from the Windows NT Server 4.0 environment.D.Remove the Windows 2000 Server CD-ROM and restart the computer by using the setup floppy disks.
[单选题]Exhibit:UPDATE EzonexamConsolidatedSET District = ‘Mexico’WHERE RtvID = 45You work as database administrator at Ezonexam.com. You handle one SQL Server 2000 computer and one database.When users run the query in the exhibit above the receive the following error message:Server: Mrh3612, Level 16, Stats 1, Line 1View or function ‘EzonexamConsolidated’ is not updateable because itcontains aggregates:How should you enable the query to run?A.Create a non-normalized EzonexamConsolidated table and populate the table with data from the base tables.B.The appropriate users should be granted UPDATE permissions on each base table.C.To enable updates on the composite tables create an INSTEAD OF trigger on the view.D.On each base table add a cascading update trigger.
[单选题]You are the administrator of a SQL Server 2000 computer named SQL1. You want to perform. ad hoc distribution queries against a database that is stored on a SQL Server 2000 computer named SQL2. SQL2 contains several databases, and each of these databases uses a different collation.You want to ensure that comparisons in distributed queries are evaluated correctly. You also want to minimize administrative overhead.How should you configure SQL1?A.Use the ALTER DATABASE statement to change the collation of the databases on SQL1.B.Add SQL2 as remote server.C.Add SQL2 as a linked server. Select the Use Remote Collation check box, and do not specify a collation name.D.Add SQL2 as a linked server. Select the Use Remote Collation check box, and specify a collation name. Repeat this process once for each database on SQL2.
[单选题]From your Windows 2000 Professional computer, you need to map drive G to the default administrative share on drive C of a server named AppSrv.What can you do to map the drive?A.Run thenet share C$=G:\command.B.Run thenet use G: \\AppSrv\C$command.C.Browse to AppSrv in Windows Explorer, and map drive G to the C$ share.D.Browse to AppSrv in My Network Places, and map drive G to the C$ share.
[单选题]You are the network administrator for Ezonexam.The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: Boot disk or operating system not found. You use Recovery Console to discover that the files on partition C are corrupted.You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.What should you do?A.Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.B.Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.C.Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.D.Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.
[单选题]You are the administrator of a new Microsoft Windows 2000 Server computer named CPSRV1.CPSRV1 is a member server in your companys Windows NT 4.0 domain, which is named CPDOMAIN. A separate Windows NT domain named CPUSERS contains all of your companys user accounts. A trust relationship exists between the CPDOMAIN domain and the CPUSERS domain.You are installing SQL Server 2000 on CPSRV1.You specify a service account for each SQL Server service as shown in the following table:ServiceServiceaccountMSSOLServerCPUSERSsqlsviDomainSOLSelveragentCPUSERS sqlagentDomaiAfter the installation is complete, the MSSQLServer service and the SQLServerAgent service do not start. You need to configure the services to start without changing any security settings in either domain.What should you do?A.Configure the services to run under the local system accountB.Add CPSRV1 to the CPUSERS domainC.Add CPUSERS\sqlsvr and CPUSERS\sqlagent to the local administrators group on CPSRV1D.Add CPUSERS\sqlsvr and CPUSERS\sqlagent to the CPUSERS\Domain Admins groups.E.Add CPUSERS\sqlsvr and CPUSERS\sqlagent to the CPUSERS\Domain users groups.
[单选题]You are the administrator of a SQL Server 2000 computer in your companys personnel department. Employee data is stored in a SQL Server 2000 database. A portion of the database schema is shown in the exhibit.employee8lemployeeIDpositionfirstNamemiddleNamepositionEDpositionNamelastNamework phoneaximumsalerypositionEDdepartmentIDcurrentsalerydepartmentdepartmentNamedivisionISYou want to create a text file that lists these data columns in the following format title, FirstName, LastName, WorkPhone, PositionName, DepartmentName.You want to create the text file as quickly as possible. You do not expect to re-create this file, and you want to avoid creating new database objects if possible.What should you do?A.Use the bcp utility to export data from each table to a separate text file. Use format files to select the appropriate columns. Merge the data from each text file into a single text file.B.Create a view that joins data from all three tables include only the columns you want to appear in the text file. Use the bcp utility to export data from the view.C.Create a SELECT query that joins the data from the appropriate columns in the three tables. Add an INTO clause to the query to create a local temporary table. Use the bcp utility to export data from the local temporary table to a text file.D.Create a SELECT query that joins the data from the appropriate columns in the three tables. Add an INTO clause to the query to create a global temporary table. Use the bcp utility to export data from the global temporary table to a text file.
[单选题]You need to install Windows 2000 Professional on 300 computers for a customer company called Ezonexam. The computers have different manufacturers and different hardware abstraction layers (HALs). You plan to use a Windows 2000 Server computer running Remote Installation Services (RIS) to perform. the installation.After the installation is complete for the first 25 computers, users of those computers report problems. You discover that the latest Windows 2000 service pack resolves those problems.You want to apply the service pack to the remaining 275 computers during the installation. What should you do?A.Install the service pack on a reference Windows 2000 Professional computer, and then run the Riprep command on that computer. Use the resulting image for RIS.B.Install the service pack on the RIS server, and then run the Riprep command on that server. Use the resulting image for RIS.C.Copy the service pack to the CD-based image shared folder used by RIS.D.Slipstream the service pack into a new i386 distribution shared folder, and then run the Risetup command to create a new CD-based image for the RIS server.
[多选题]You are the administrator of three SQL Server 2000 computers at Five Lakes Publishing. One server, FLPSQL01, stores order data. You want to be able to use the other two servers, FLPSQL02 and FLPSQL03, to answer queries and run report. The planned network configuration is shown in the exhibit.L〔gYou want to use the database Maintenance Plan wizard to configure log shipping from FLPSQL01 to FLPSQL02 and FLPSQL03. You do not want users to add any new data on FLPSQL02 and FLPSQL03, but they must be able to run queries and reports.Which two actions should you take? (Each correct answer presents part of the solution. Choose two)A.Set the database load state for each destination server to No recovery mode.B.Set the database load state for each destination server to standby mode.C.Enable the allow database to assume primary role option for both destination servers.D.Enable the allow database to assume primary role option for one destination server and then disable this option for other destination server.E.Disable the allow database to assume primary role option for both destination servers.
[多选题]You are the administrator of your company’s network. Your network has 20 Windows 2000 server computers in the contoso.com domain. Your network also has 250 Windows 98 computers. You want to perform. a clean installation of Windows 2000 Professional on all of the Windows 98 computers. All of the Windows 98 computers are identical models and are PXE complaint.You want to accomplish the following goals:1. An unattended installation of Windows 2000 Professional will be performed.2. An unattended installation of company’s standard applications will be performed during the installation of Windows 2000 Professional.3. Each computer will be assigned a unique security identifier description.4. The unattended installation script. will be modified so that the computers automatically join the contoso.com domain.You take the following actions:1. Install Windows 2000 Professional on a Windows 98 computer named computer1.2. Install and configure computer standard applications on computer1.3. Use Setup Manager on computer1 to create an unattended.txt file based on the current configuration including domain membership.4. Start the remaining Windows 98 computers and then install Windows 2000 Professional. Use the unattended.txt file to provide the setting for the installation.Which result or results do these actions produce? (Choose all that apply)A.An unattended installation of Windows 2000 Professional will be performed.B.An unattended installation of company’s standard applications will be performed during the installation of Windows 2000 Professional.C.Each computer will be assigned a unique security identifier description.D.The unattended installation script. will be modified so that the computers automatically join the contoso.com domain.
[单选题]You are the administrator of a SQL Server 2000 database named Articles. A large city newspaper uses this database to store its archived newspaper articles. Journalists query the database as part of their research. You have created full-text indexes so that users can query the articles quickly.A hardware failure forces you to restore the entire database from backup. After you restore the database, the journalists report that they can no longer run queries without receiving errors.You want to ensure that the journalists can query the database. What should you do?A.Create a new full-text catalog for the Articles databaseB.Rebuild the full-text catalog for the Articles databaseC.Create a new full-text index on the table that holds the text for the articlesD.Repopulate the full-text index on the table that holds the text for the articles
[单选题]You are a database administrator in the Los Angeles branch office of a specialty foods supplier. A mainframe. database at the headquarters contains all company data. Each branch office contains a SQL Server 2000 computer that imports regional data from the mainframe. database.The server in Los Angeles contains a Data Transformation Services (DTS) package that uses OLE DB to connect to the company’s mainframe. database. The DTS package extracts and transforms data about buyers and products for that region. The DTS package then writes the data to the SQL Server database in Los Angeles.You need to configure a SQL Server computer for the new branch office in Sydney. You want to copy the Los Angeles package and modify it so that it writes data to the SQL Server database in Sydney.You use the DTS Designer to modify the DTS package so that it imports regional data from the mainframe. database to the server in Sydney. The modified DTS package runs successfully on the server in Los Angeles. You save this DTS package to the server in Sydney, but the server in Sydney cannot connect to the mainframe. database.You want to enable the server in Sydney to connect to the mainframe. database. What should you do?A.Change the connection properties in the DTS package so that the package uses new login credentials to connect to the mainframe. database.B.Modify the workflow in the DTS package so that the server in Sydney is included.C.On the server in Sydney, install an OLE DB provider for the mainframe. database.D.On the server in Sydney, delete and then re-create the DTS package.
[多选题]You need to install Windows 2000 Server on one of your older Windows NT Server 4.0 computers. The server has dual processors, 2 GB of RAM, a RAID controller with five SCSI hard disks in an array, and a generic 10/100-MB network adapter. You begin the server installation by updating the SCSI firmware.You then start the installation of the Windows 2000 Server operating system. During the next portion of the installation, you receive an error message indicating that no hard disks can be found.You want to successfully install Windows 2000 Server on the computer.What should you do? (Each correct answer presents part of the solution. Choose two)A.Restart the installation by using the Windows 2000 Installation CD-ROM. Press F3 during the text-mode setup.B.Restart the installation by using the Windows 2000 Installation CD-ROM. Press F6 during the text-mode setup.C.Restart the installation by using a MS-DOS boot disk with a CD-ROM driver.D.Insert a disk with the original SCSI firmware.E.Insert a disk with the OEM SCSI driver.
[多选题]The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.You want to prevent all users from browsing the network.What should you do? (Each correct answer presents a complete solution. Choose two.)A.Create a Windows Group Policy that denies user access to My Network Places.B.Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.C.Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.D.Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.E.Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.
[单选题]You are the network administrator for Ezonexam. The network consists of a single Active Directory domain Ezonexam.com. All network servers run Windows Server 2000.Your network includes a shared folder named EzonexamDocs. This folder must not be visible in a browse list.However, users report that they can see EzonexamDocs when they browse for shared folders.How should you solve this problem?A.Modify the share permissions to remove the All - Read permission on EzonexamDocs from the Users group.B.Modify the NTFS permissions to remove the Allow - Read permissions on EzonexamDocs from the Users group.C.Change the share name to EzonexamDocs #.D.Change the share name to EzonexamDocs $.
[单选题]You are the network administrator for Ezonexam. You are planning to upgrade 35 Windows NT Server 4.0 computers to Windows 2000 Server. You want to accomplish the upgrades by using a distribution server. The Windows NT Server 4.0 computers support a tight production schedule that requires them to be online from 8:00 A.M. to midnight, seven days a week. You schedule the upgrade to run during non-business hours. Because of the limited amount of time the upgrades must be performed as quickly as possible.You want to complete the upgrades before production begins in the morning.What should you do?A.Perform. an unattended installation by running the winnt32 command and the /cmdcons switch.B.Perform. an unattended installation by running the winnt32 command and specify the use of a .txt file and a uniqueness database file.C.Perform. an unattended installation by running the winnt command and specify the use of a .txt file and a uniqueness database file.D.Perform. an unattended installation by using a Winnt.sif file with a commands section that initiates the Update.exe command in quiet mode.
[单选题]You are the administrator of Ezonexam.com’s network.Ezonexam has several branch offices. Each branch office has a Windows 2000 Server computer with Service Pack 2 installed. Each branch office also has a technical support department. You want to configure the remote Windows 2000 Server computers so that whenever a new driver becomes available from Microsoft, the branch offices are notified automatically when the administrator logs on to the server.What should you do?A.Install Windows UpdateB.Install the Windows 2000 Resource Kit.C.Configure System File Checker to notify the branch offices.D.Configure Window File Protection to notify the branch offices.
[单选题]You are installing Windows 2000 server on Windows NT using an unattended installation. You find out the SCSI adapter is not supported by Microsoft HCL. You find out from the manufacturer that a new driver is available for installing on Windows 2000. How should you enter this information in the unattended installation?A.Specify $OEM$/TextmodeB.Specify $OEM$/C$/DriversC.Create a subfolder pointing to the share pointD.Create a subfolder called drivers.
[多选题]You are the administrator of your company’s network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.You want to accomplish the following goals:1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.2. Existing user environments will be maintained on the Windows 2000 Professional computers.3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.4. The RIS image and the upgraded applications will be enabled as they are added to the network.You take the following actions:1. Install the RIS image on a Windows 2000 Professional computer named Computer1.2. Install the upgraded applications on Computers1.3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.Which result or results do these actions produce? (Choose all that apply.)A.An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.B.Existing user environments will be maintained on the Windows 2000 Professional computers.C.The network name of each Windows 2000 Professional computer will be changed to match its asset tag.D.The RIS image and the upgraded applications will be enabled as they are added to the network.
[单选题]You are the workstation administrator at Ezonexam. You administer a Windows 2000 Professional computer named VE1.VE1 has a shared color laser printer named Printer1. You need to print a document immediately. The print queue for Printer1 has ten jobs ahead of yours in the queue.You want to print your document without waiting for the other ten jobs to print. You want to do this with the least amount of administrative effort.What should you do?A.Change the priority of all other print jobs to99.B.Change the priority of your print job to99.C.Change the configuration of Printer1 to Not Shared.D.Create a new port on Printer1 that connects to a different print device. Configure Printer1 to use the new port.
[单选题]You want to connect your Windows 2000 Professional computer to a new color laser printer. The printer is Plug and Play compliant. The printer is included on the current Hardware Compatibility List (HCL).You are a member of the Sales organizational unit (OU). You want to share the printer with other users in the Sales Organizational Unit.You plug the printer into the LPT port on the back of the computer. You then attempt to install the 32-bit application printer software that came with the printer. During the installation you receive an error message as shown in the exhibit.Printer ErrorFailed to load WINPRINT, DLL[0000007E 293] The specified module could not be foundWhat should you do before you share the printer to other users in the Sales OU?A.Change the LPT port settings to enable legacy Plug and Play detection on your computer.B.Change the LPT port setting to bidirectional in the BIOS on your computer. Then reinstall the printer software.C.Connect the printer to another computer in the Sales Organizational Unit. Then install the device drivers for the printer.D.Obtain and install WDM-compliant device drivers and printing software for the printer.
[单选题]You are the administrator of a Windows 2000 Professional computer that has a shared printer. Several departments in your company use the shared printer.The Sales department frequently prints multiple-page presentation graphics, which take a long time to print. Users in other departments who have short messages to print must wait an unnecessarily long time for their jobs to print.You want to improve the efficiency of printing for all users who use the shared printer. You want to accomplish this with the least amount of administrative effort.What should you do?A.Configure the priority of the printer to 50. Add a new printer, and set the priority to 1. For the new printer, deny print permission for users in the Sales department.B.Configure the priority of the printer to 50. Add a new printer, and set the priority to 99. For the new printer, deny print permissions for users in the Sales department.C.Monitor the print queue and raise the priority of all print jobs that are sent by users who are not members of the Sales department.D.Delete the old printer. Add a new printer, and set the priority to a higher value. Pause the print queue only when graphic intensive print jobs are printing.
[单选题]You want to upgrade 400 computers from Windows 95 to Windows 2000 Professional. Most of the computers in your company use the same hardware. However, several different peripheral devices are used throughout the company.You want to verify that the hardware in use is compatible with Windows 2000 Professional. You want to accomplish this with least amount of administrative effort.What should you do?A.Create several different computer configurations. Install Windows 2000 Professional and enable driver signing.B.Create a bootable floppy disk that contains and automatically runsWinNT32.exe/CheckUpgradeOnlyQ. Send the floppy disk to each user on the network.C.Copy the contents of Windows 2000 Professional CD-ROM to a network share. From the network, modify your network logon scripts to runWinNT32.exe/Unattended:ReportOnly.D.Use Setup Manager to create a Setup.inf file. Add the entryReportOnly=Yes to the [Win9xUpg] section of the answer file. RunWinnt32.exe /Unattended:Setup.infon all of the different computer configurations.
[单选题]You need to install Windows 2000 Professional on a new computer in your network. You use the setup manager wizard to configure a fully automated installation script. file. You begin an unattended installation and leave the office.When you return, the installation has reached the GUI-mode setup and you see the following error message Unattended setup is unable to continue because a setup parameter specified by your system administrator or computer manufacturer is missing or invalid.You need to complete the installation. What must you do?A.In the unattended section of the answer file, set theOemPreinstallproperty to Yes.B.In the NetBinding section of the answer file, specify theEnablevariable.C.In the UserData section of the answer file, specify theProductIDvariableD.In the GUIUnattended section of the answer file set theOemSkipWelcomeproperty to 1.
[单选题]You want to configure a multiboot system with Windows NT Workstation and Windows 2000 Professional.What should you do?A.When installing Windows 2000 Professional run chkdisk in Windows NT Workstation.B.Disable the disk compression in Windows NT Workstation.C.Install service pack four or later in Windows NT Workstation.D.Install the distributed file system client on the Windows NT Workstation.
[多选题]You are the administrator of a Windows 2000 network. You need to store secured files for your company’s accounting and legal departments on a Windows 2000 Professional computer.You want to accomplish the following goals:1. Enable users in both departments to access their own files from the network2. Enable users in the accounting department to view the legal accounting department’s documents3. Prevent users in the legal department from being able to view the accounting department’s documents4. Enable managers within the company to access and modify both the accounting and the legal department’s filesYou take the following actions:1. Create two shared folders named Accounting and Legal2. Create three groups named Accounting, Legal, and Management3. Allow the Accounting group modify permission on the Accounting folder4. Allow the Legal group modify permission on the Legal folders.5. Allow the Management group modify permission on both the Accounting and Legal folders.Which result or results do these actions produce? (Choose all that apply)A.Users in both departments can access to their own files from the network.B.Users in the accounting department can view the legal department’s documents.C.Users in the legal department cannot view the accounting department’s documents.D.Company managers can access and modify both departments’ files.
[单选题]You are the desktop administrator for Ezonexam, Inc. The company’s network contains an intranet Web farm, which consists of three Web servers. The Web servers are named Ezonexam1, Ezonexam2, and Ezonexam3. Users access the Web farm by using the URL http://team.Ezonexam.com. The relevant portion of the network is configured as shown in the exhibit.TestKing 1TestKing2TestKing3EthernetBrunoDNS ServerJack is a user in the company operations department. Jack uses Internet Explorer on this Windows 2000 Professional computer to access files that are located on the Web farm. Jack reports that when he attempts to access a file named Schedule.xls by using the URL http://team.Ezonexam.com/ops/schedule.xls, Internet Explorer displays the following error message: DNS error or server not found.The network administrator informs you that the company DNS server is unavailable. However, Jack needs to access the Schedule.xls file immediately. You need to ensure that King can access the file by using Internet Explorer on his computer.Which URL should you instruct King to use?A.http://Ezonexam1/ops/schedule.xlsB.file://Ezonexam1/ops/schedule.xlsC.http://team.Ezonexam.com/ops$/schedule.xlsD.file://team.Ezonexam.com/ops/schedule.xls
[单选题]You need to create a web share on your Windows 2000 Professional computer named Admin01. You create a folder named reports. Then you configure web sharing on Reports. You name the share WebReports and allow Read permissions on the share.You test the web share by pointing to http://admin01/WebReports from another computer. You receive the following error message, ’You are not authorized to view this page.’You need to be able to access the folder. What must you do?A.Allow write permission on WebReports.B.Allow directory browsing permissions on WebReports.C.In the IIS console, enable anonymous access to WebReports.D.In the IIS console, set the execute permissions option to script. and executables on WebReports.
[单选题]You are the administrator of your company’s network. An employee named Mark is leaving the company. A new employee named Eric has been hired to replace him.Mark has a local user account on a Windows 2000 Professional computer. Mark has rights to multiple files and folders on the computer.You want Eric to have the same rights and permissions that Mark has. You want to ensure that Mark will no longer have access to the files and folders. You want to accomplish this with least administrative effort.What should you do?A.Rename Mark’s user account to Eric and change the account password.B.Create Eric’s account by copying Mark’s profile to Eric’s account. Delete Mark’s account.C.Create Eric’s account by copying Marks account. Delete Mark’s account.D.Delete Mark’s account. Add Eric’s account. Add Eric to the same groups to which Mark belonged. Grant Eric to all the individual user rights and permissions that Mark had.
[单选题]You are the administrator of Ezonexam’s network. You want to deploy a Windows 2000 Professional service pack to 10 computers in the Development organizational unit.You create a Windows 2000 installer package file for the service pack. You use the package file to successfully install the service pack to other computers in the domain. You assign the package file to the Development organizational unit. After the installation, you notice that the service pack was not installed on any of the 10 computers.You want to ensure that the service pack is successfully installed on the computers in the Development organizational unit. What should you do?A.Use Computer Management to start the Windows installer service on all the computers in the Development organizational unitB.Use the local administrator account to log on to the computers in the Development organizational unit. Then redeploy the service pack to the computers in the Development organizational unit.C.Run Windows Installer to repair the package file. Then redeploy the service pack to the computers in the Development organizational unit.D.Add the user accounts from the Development organizational unit to a DACL. Grant the user accounts read permission to the service pack deployment directory.
[单选题]You need to install Windows 2000 Professional on 30 new computers. You also need to deploy a Windows 2000 Professional service pack during the installation.First, you create a network distribution folder named InstallFiles. You copy the i386 folder from the Windows 2000 Professional CD to the InstallFiles folder.What should you do A.Copy the service pack files to the InstallFiles\Misc folder.B.Copy the service pack files to the InstallFiles\$OEM$ folder.C.From an existing client computer, run theUpdate -ucommand from the service pack to the InstallFiles folder.D.From an existing client computer, run theUpdate -s:InstallFilescommand from the service pack to the InstallFiles folder.
[单选题]You want to install Windows 2000 Professional on 30 PXE-compliant computers and 35 non-PXE-compliant computers. All 65 computers are included on the current hardware compatibility list (HCL). You create a RIS image. You load the image on the RIS server. You then start the 65 computers.You find that the 30 PXE-Compliant computers can connect to the RIS server.However, the 35 non-PXE-compliant computers fail to connect to the RIS server. What should you do?A.Run Rbfg.exe to create a Non-PXE-compliant startup disk.B.Run Riprep.exe to create a Non-PXE complaint startup disk.C.Grant the Everyone group NTFS Read permission for the RIS image.D.Grant the Administrators group NTFS Read permission for the RIS image.
[多选题]You are the administrator of SQL Server computers. One server is named SQL7, and other is named SQL2000. SQL7 is running SQL Server 7.O and SQL2000 is running SQL Server 2000.The net-libraries on SQL2000 are configured as shown in the exhibit.SQL7 is configured so that it has the named pipes, TCP/IP, NWlink, IPX/SPX and multiprotocol Net Libraries.SQL2000 and SQL7 exchange confidential company information. You need to ensure that unauthorized users cannot access this information.Which two actions should you take? (Each correct answer presents part of the solution. Choose two)A.On SQL2000, enable the multiprotocol net library.B.On SQL2000, select the force protocol encryption check box.C.On SQL7, select the force protocol encryption check box.D.On SQL2000, install a secure sockets layer (SSL) encryption certificate.E.On SQL2000 and SQL7, enable multiprotocol encryption.
[多选题]You are the administrator of several SQL Server 2000 computers. A data Transformation Services (DTS) package uses native OLE DB providers to transfer data between the servers. Connection details for the servers are specified in .udl files. The .udl files are frequently updated as connection details change.You want to distribute the DTS package as a file to developers in your company. You want to make sure connection details are available to developers who receive the DTS package.Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two)A.Enable the Always read properties from UDL file option in the Connection Properties dialog box.B.Disable the Always read properties from UDL file option in the Connection Properties dialog box.C.Delete the .udl files and store connection details in the registry by using system data source names.D.Delete the .udl files, and store connection details in the registry by using user data source names.E.Make the .udl files available on a network share.
[多选题]You are the administrator of a SQL Server 2000 computer. The server contains a Data Transformation Services (DTS) package that queries multiple databases and writes the results to a text file. You run this package by using a Microsoft Windows batch file. The batch file uses the dtsrun utility to execute the DTS package.You want to ensure that connection properties, such as login names and passwords, cannot be read or modified by users. Which two actions should you take? (Each correct answer represents part of the solution. Choose two.)A.Save the DTS package so that it has an owner password.B.Save the DTS package so that it has a user password.C.Encrypt the DTS package details in the command line of the dtsrun utility.D.Store the DTS package in the Meta. Data Services repository.E.Store the DTS package as a Microsoft Visual Basic file.
[单选题]You are the database administrator for a retail company. The company owns 270 stores. Every month, each store submits approximately 2,000 sales records, which are loaded into a SQL Server 2000 database at the corporate headquarters.A Data Transformation Services (DTS) package transforms the sales records, as they are loaded. The package writes the transformed sales records to the Sales table, which has a column for integer primary key values. The IDENTITY property automatically assigns a key value to each transformed sales record.After loading this month’s sales data, you discover that a portion of the data contains errors. You stop loading data, identify the problem records, and delete those records from the database.You want to reuse the key values that were assigned to the records that you deleted. You want to assign the deleted key values to the next sales records you load. You also want to disrupt users’ work as little as possible.What should you do?A.Export all records from the Sales table to a temporary table. Truncate the Sales table, and then reload the records from the temporary table.B.Export all records from the Sales table to a text file. Drop the Sales table, and then reload the records from the text file.C.Use the DBCC CHECKIDENT statement to reseed the Sales table’s IDENTITY property.D.Set the Sales table’s IDENTITY_INSERT property to ON. Add new sales records that have the desired key values.
[单选题]You are the database administrator for a financial services company. Employees enter data 24 hours a day into a SQL Server 2000 database. These employees report slower response times when new account information is gathered from branch offices and added to the database. You currently use the following BULK INSERT statement to add the account information:BULK INSERT finance.dbo.customersFROM ‘di\bulk\accts143_10141000.txt’WITH DATAFILETYPE = ‘char’,FIELD/TERMINATOR = ‘\t’,ROWTERMINATOR = ‘\n,’TABLOCKYou want to ensure that response times do not slow when new account information is added to the database. What should you do A.Drop the indexes for the customers table before the data load, and then re-create the indexes after the data load is complete.B.Remove the TABLOCK option from the BULK INSERT statement.C.Add the BATCHSIZE option to the BULK INSERT statement and then set the option equal to 10 percent of the number of rows to be loaded.D.Add the ROWS_PER_BATCH option to the BULK INSERT statement and then set the option equal to 10 percent of the number of rows to be loaded.
[多选题]You have stored confidential financial data in a shared folder named AccSecured on your Windows 2000 Professional computer. Your company hires an intern named Richard. You create a subfolder named intern, which Richard needs to access. You want to allow Richard access to the intern subfolder only.You create a user account named intern. You want to allow the intern user account the ability to update, create, and delete files within the intern folder. You need to prevent Richard from accessing any other files or folders within the AccSecured folder.What should you do? (Choose all that apply)A.Map a network drive to the AccSecured\intern folder from Richard’s computer.B.Map a network drive to the AccSecured shared folder from Richard’s computer.C.Allow the intern user account modify permissions on the intern subfolder.D.Allow the intern user account traverse folder/execute file permission on the AccSecured folder.E.Allow the intern user account list folder content permission on the AccSecured folder. Remove read extended attributes and read permissions.
[单选题]You are the administrator of the Coho Vineyard network. The network consists of 10 Windows 2000 Advanced Server computers and 250 Windows 2000 Professional computers.Your company has two domains cohovineyard.com and westcoastsales.com.The company’s intranet site is on a Windows 2000 Advanced Server computer named ServerA. ServerA is in the cohovineyard.com domain and is running Internet Information Services (IIS) and Microsoft Proxy Server 2.0You want to configure the Windows 2000 Professional computers in the westcoastsales.com domain to access the intranet site. You want users to be able to connect to the intranet site by using the URL http://serverA rather than its fully qualified domain name.What should you do?A.Add cohovineyard.com to the Domain Suffix Search Order on the computers.B.Add westcoastsales.com to the Domain Suffix Search Order on the computers.C.Add westcoastsales.com to the exceptions list in the proxy server settings on the computers.D.Configure the proxy server settings on the computers to bypass the proxy server for intranet addresses.
[单选题]You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional.Each computer has an 8 GB hard disk.You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D.In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.What should you do?A.Use Windows 2000 Professional to configure drive D as a dynamic partition.B.Use Windows 2000 Professional to enable encrypting file system on drive D.C.Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permission.D.Reinstall Windows NT Workstation after configuring disk quotas.
[单选题]You are a network administrator for Ezonexam.com’s Windows 2000 network.Your network has 200 Windows 2000 Professional computers and 15 Windows 2000 Server computers.Users on the network save their work files in home folders on a network server. The NTFS partition that contains the home folders has Encrypting File System (EFS) enabled. A user named Jack Bauer leaves the company. You grant her manager the Full Control NTFS permission to Jack’s home folder. When the manager attempts to open any of the files, she receives the following error message: Access is denied.What should you do?A.Use System File Checker (SFC) to decrypt the file.B.Log on the network as the Recovery Agent. Decrypt the files for the manager.C.Log on the network as the administrator. Use the cipher command to decrypt the files.D.Log on the network as a member of the Backup Operators group. Decrypt the files for the manager.
[单选题]Your Windows 2000 Professional computer contains a single hard disk configured as a single partition.You want to move a folder named Sales under a folder named Corp on your computer.You want the files in the Sales folder to remain compressed after moving the folder. You want the files in the Corp folder to remain uncompressed. You want to ensure that the files are recoverable in case of any disk problems. You also want to move the files with the least amount of administrative effort.What should you do?A.Copy the Sales folder to the Corp folder. Do nothing further.B.Backup the Sales folder. Move the Sales folder to the Corp folder.C.Compress the Corp folder. Then copy the Sales folder to the Corp folder.D.Move the Sales folder to a second computer. Then move the Sales folder to the Corp folder.
[单选题]You are upgrading a computer from Windows 98 to Windows 2000 Professional. The computer is a 400-Mhz Pentium III, and has 128 MB of RAM and a 10-GB hard disk. You are performing the installation by using the Windows 2000 Professional CD-ROM. After the text mode installation portion is complete, you restart the computer. The BIOS virus checker on your computer indicates you’re your computer is infected with a Master Boot Record virus.What should you do before you continue the installation?A.Remove the virus checker in Windows 98.B.Disable the BIOS virus checker and restart the computer.C.Run Fixmbr.Exe from the Windows 2000 Professional CD-ROM.D.Modify the Boot.ini file to include a signature parameter on the ARC path of the system partition.
[单选题]You are the administrator of Ezonexam.com’s Windows 2000 network.Your computer is configured to use both Windows 2000 Professional and Windows NT Workstation 4.0 Service Pack 3. Your computer has three hard disks: Disk 0, Disk1, and Disk2. Windows NT Workstation 4.0 is installed on Disk 0. Windows 2000 Professional is installed on Disk1. You want to store your project files on Disk2. You configure Disk2 as a basic volume and format the volume as NTFS in Windows 2000 Professional. You then start Windows NT Workstation 4.0. You find that you cannot access your project files.You want to be able to access your project files when using either of the operating systems.What should you do?A.Upgrade Windows NT Workstation 4.0 to Service Pack 4 or later.B.Configure Disk 2 as a dynamic volume then format as an NTFS partition.C.Configure Disk 2 to use Encrypting File System (EFS).D.Configure Disk 2 as a basic volume and format the volume as FAT32.
[单选题]You copy the contents of the Windows 2000 Professional CD to a shared network folder named \\Server1\Win2000p. You use the shared folder to perform. over-the-network installations of Windows 2000 Professional on new computers purchased by your company.You receive a Windows 2000 Service Pack CD. You apply the Service Pack to Server1 and to the \\Server1\Win2000p folder.You discover that the Service Pack contains several files that are incompatible with the new computers.You want to make sure that the Service Pack files are not installed on any new computers until the problem has been corrected. What can you do?A.Use Update.exe from the Service Pack CD on server1.B.Select the Uninstall option.C.Copy the contents of the Windows 2000 Professional CD to \\Server1\Win2000p again, allowing the operating system to overwrite newer files while copying.D.Run\\Server1\Win2000p\WinNT32.exe/uon the new computer.E.RunUpdate.exe/s:\\Server1\Win2000p/ufrom the Service Pack CD on Server1.
[多选题]You are the administrator of a new multiprocessor SQL Server 2000 computer. You are migrating data from other database management systems to this server. You need to load data from two data files into a new table on the server. The table is empty and has no indexes.You want to complete the data load as quickly as possible. What should you do? (Each correct answer represents part of the solution. Choose all that apply.)A.Apply a bulk update lock to the table.B.Use separate client connections to load the files into the table simultaneously.C.Create a clustered index on the table.D.Specify the Full Recovery model for the database.E.Specify the Bulk-Logged Recovery model for the database.
[多选题]You are the administrator of a SQL Server 2000 computer. The server contains your company’s order processing database. Two-hundred operators take orders by telephone 24 hours a day. Threehundred data entry personnel enter data from orders received by mail.To ensure that order data will not be lost, your company’s disaster recovery policy requires that backups be written to tape. Copies of these tapes must be stored at an off-site company location. Orders must be entered into the database before they can be filled. If the server fails, you must be able to recover the order data as quickly as possible.You need to create a backup strategy that meets the company requirements and minimizes server workload. Which two actions should you take? (Each correct answer represents part of the solution. Choose two.)A.Perform. a combination of full database and filegroup backups.B.Perform. a combination of full database and file backups.C.Perform. a combination of full database, differential, and transaction log backups.D.Back up the data to a local tape drive.E.Back up the data to a network share, and then use enterprise backup software to write the disk backups to tape.
[多选题]You are the administrator of a SQL Server 2000 computer. Your company purchased an accounting application from a vendor. The application stores its data in a database named Accounting on the server. The tables in this database contain columns that function as primary keys, but PRIMARY KEY and FOREIGN KEY constraints are not used.You need to replicate data from this database to another SQL Server computer. This server will use the replicated data to generate reports. Most reports will run each month, but the accounting department needs to have the ability to run reports at any time. Reports should be accurate through the last full working day.You cannot make any changes to the database, but you need to implement replication. Which two actions should you take? (Each correct answer presents part of the solution. Choose two)A.Implement merge replication.B.Implement snapshot replication.C.Implement transactional replication.D.Schedule replication to run continuously.E.Schedule replication to run during off-peak hours.
[单选题]You are the administrator of a SQL Server 2000 computer. You are configuring a database for an inventory application. The hard disks on your server are configured as shown in the exhibit.Physical disk ODrive c4.5GDrive d4,5GBPhysical disk 1Drive e4.5G日DatabaseServerDrive F4.5GBThe operating system files are located on drive C. Your database will store a maximum of 6 GB of data and requires a maximum of 2 GB of disk space for the transaction log.You want to optimize database performance. What should you do?A.Add a 2-GB transaction log to drive D, a 3-GB data file to drive E, and a 3-GB data file to drive FB.Add a 1-GB transaction log to drive C, a 1-GB transaction log to drive D, a 3-GB data file to drive E, and a 3-GB data file to drive FC.Add a 1-GB transaction log to drive E, a 1-GB transaction log to drive F, a 3-GB data file to drive E, and a 3-GB data file to drive FD.Add a 2-GB transaction log to drive F, a 3-GB data file to drive D, and a 3-GB data file to drive E
[单选题]You are the administrator of a SQL Server 2000 computer. The server contains a database that stores financial data. You want to use Data Transformation Services packages to import numeric data from other SQL server computers. The precision and scale values of this data are not defined consistently on the other servers.You want to prevent any loss of data during the import operations. What should you do?A.Use the ALTER COLUMN clause of the ALTER TABLE statement to change data types in the source tables. Change the data types so that they will use the lowest precision and scale values of the data that will be transferred.B.Use the ALTER COLUMN clause of the ALTER TABLE statement to change data types in the destination tables. Change the data types to reflect the highest precision and scale values involved in data transfer.C.Set a flag on each DTS transformation to require an exact match between source and destination columns.D.Set the maximum error count for each DTS transformation task equal to the number of rows of data you are importing. Use an exception file to store any rows of data that generate errors.E.Write Microsoft ActiveX script. for each DTS transformation. Use the script. to recast data types to the destinations precision and scale values.
[单选题]You are the administrator of a SQL Server 2000 computer. The server contains a database named Acct. You purge the Acct database of old records and perform. a full backup. The database now uses 4 GB of space. The database files are configured as shown in the Acct Properties exhibit.Acct PropertiesGenetal: Dala Fle: I Transacion Log Filegroups Oona Emissions IDatabase hlesSpace alocaed IB FleoupAcct DataI c\\datalacct-datamdf4000PRIMARYAcct DaatI d: \\data\\Acct_ Datal_D.4000Aect DAta2e: \\data\\Acct_D3a2D.4000PRIMARYFle propertiesaUtomatc动gowFle gowthMaximum fie sizeC Megabytec Unrestricted fe goshc BypetcenkC Restrict file gowth MBIThe server has two hard disks that are configured as shown in the Server Configuration exhibit.Physical disk 0Drive C9 GB TolLAcct log. Idf1 GB Freo3 GBPhysical dis水k1Drive CData base45 8 Tots500MB FreeDrive EfGB TotalTO NB FreeThe 3 GB transaction log file for the Acct database is stored on drive C. You need to make room for a new database that has a 3 GB data file and a 1 GB transaction log file. You want to optimize database performance on both databases. You also want to minimize administrative overhead.What should you do A.Shrink the empty data file on drive E. Place the new data file and the new log file on drive E.B Shrink the empty data file on drive E. Backup and shrink the log file on drive C to 2 GB. Place the new data file on drive E and the new log file on drive C.C.Shrink the data file on drive D to 1 GB, and then shrink the data file on drive E to 2 GB. Place the new data file on drive D and the new log file on drive E.D.Shrink and delete the data file on drive C, and then shrink the database files on drives D and E so that they are both 2 GB. Place the new data file and the new log file on drive C.
[单选题]You are the administrator of a SQL Server computer. Users report that the database times out when they attempt to modify data. You use the Current Activity window to examine locks held in the database as shown in the following screenshot.spid 51 spid 52 spid 53(Blocking)(Blocked By52)You need to discover why users cannot modify data in the database, but you do not want to disrupt normal database activities. What should you do?A.Use the spid 52 icon in the Current Activity window to discover which SQL statement is being executedB.Use the sp_who stored procedure to discover who is logged in as spid 52C.Use SQL Profiler to capture the activity of the user who is logged in as spid 52D.Use System Monitor to log the locks that are granted in the database
[单选题]You are the administrator of a SQL Server 2000 computer. The server contains database named Sales. Users report that they cannot add new data to the database. You examine the properties of the database. The database is configured as shown in the Sales Properties exhibit.Sales propertiesGeneral Data Files Transaction Log Filegroups| Options Permissions IDatabase fileLocationSpace allocated(MB)FilegroupSales dataI E:\\ Program Files\\Micro.1000PRIMARYDeletepropertiesM Automatically grow fileFile growthC业 nrestricted file growthC By percent°BgemCancelHelpYou examine drive E. The hard disk is configured as shown in the Local Disk Properties exhibit.Local Disk(E: Properties xGeneral Tools Hardware Sharing I Security Quota ITypeLocal DiskFile system: NTFS■ Used space7. 155. 520 bytes GGG GD口 Free space333218175bes3.10GBapacity10487197595byes9.76GBDrive eDisk CleanuCompress drive to save disk s]aceM Allow Indcxing Scrvicc to index this disk for fast filc scarshingL0K_cac」_ApplyYou want the users to be able to add data, and you want to minimize administrative overhead. What should you do A.Increase the maximum file size of Sales_Data to 1,500MB.B.Use the DBCC SHRINKDATABASE statement.C.Set automatic file growth to 10 percent.D.Create another data file named Sales_Data2 in a new SECONDARY filegroup.
[单选题]You are the administrator of a SQL Server 2000 computer. One of the databases on the server contains a table named complaints. This table is used to store information about customer complaints.The customer service representatives in your company add and edit the information in the complaints table. They work with this table by using a number of client applications, including a web-based application and a Microsoft Windows 32-bit application.The customer service manager discovers that some customer complaints are marked as closed before they are resolved to the customer’s satisfaction.You need to notify the customer service manager whenever a complaint is marked as closed. You do not want to make any changes to the client applications.What should you do?A.Create an UPDATE trigger that sends an e-mail message.B.Create a stored procedure that sends an e-mail message. Use the stored procedures to make changes to the data.C.Create a user-defined function that sends an e-mail message. Use the function to make changes to the data.D.Create a rule that validates data entry. Bind the rule to the CompliantClosed column.
[多选题]You are the administrator of a SQL Server 2000 computer. You want to set up snapshot replication on the server. The server will serve as Publisher and Distributor for a minimum of 40 Subscribers.Currently, you want to publish 3GB of data, but the data is expected to grow over time. Subscribers will receive a new snapshot each month.You want to minimize the workload on the Publisher/Distributor. Which two actions should you take to configure snapshot replication? (Each correct answer presents part of the solution. Choose two)A.Store the snapshot in the default folder on the Publisher/Distributor.B.Store the snapshot in an alternative folder on the Publisher/Distributor.C.Store the snapshot in a shared folder on a file server.D.Create pull subscriptions.E.Create push subscriptions.
[单选题]You are the administrator of a new Microsoft Windows 2000 server computer named HQSQL5. HQSQL5 is a member server in your company’s Windows NT 4.0 domain, which is named HQMAIN.After installing SQL Server 2000 on HQSQL5, you configure the MSSQLServer service account to use the HQMAIN\sqladmin user account, which is a member of the local administrators group on HQSQL5.You can use the HQMAIN\sqladmin user account to log on the HQSQL5. However, the MSSQLServer service fails to start. You need to start the service. What should you do?A.Revoke Log on interactivity rights for the HQMAIN\sqladmin user account.B.Add the HQMAIN\sqladmin user account to the HQMAIN\Domain Admins group.C.Select the Password Never Expires check box for the HQMAIN\sqladmin user account.D.Grant Log on as a service rights to the HQMAIN\sqladmin user account.
[单选题]You are the administrator of a SQL Server 2000 computer. Your company uses the server to store service contract information for its customers.You are also the administrator of Oracle relational database management system (RDBMS) server.This server is used to store your company’s financial information. The financial information is updated frequently throughout the day.You need to create a series of reports that combine the service contract information and the financial information. These reports will be updated several times a day.You want to create reports on the SQL Server computer by using the minimum amount of disk space.What should you do?A.Set up SQL server replication to replicate the data from the oracle server to the SQL server computer.B.Set up the oracle server as a linked server. Create a view that joins the service contract information and the financial information.C.Set up data transformation services (DTS) package that imports and transforms the database from the oracle server to the SQL server computer. Use SQL server agent to execute the DTS package throughout the day as needed.D.Set up Microsoft ActiveX script. that connects to the oracle server and imports the financial information into SQL server temporary table. Create a view that joins the service contract information and the temporary table.
[单选题]You are the administrator of a SQL Server 2000 computer. You create a Data Transformation Services (DTS) package. The package is stored as a local package on the server. The package exports data from an online transaction processing (OLTP) database system to an online analytical processing (OLAP) database system that is located on a second SQL Server 2000 computer.You want the package to execute automatically each evening at 8:00 P.M. What should you do?A.Use SQL Server Enterprise Manager to create a new job Create a CmdExec job step that runs the dtsrun utility Schedule the job to run each night at 8:00 P.M.B.Use SQL Server Enterprise Manager to create a new job Create a Transact-SQL job step to query data from the OLTP database Create a second Transact-SQL job step to launch the DTS package Schedule the job to run each night at 8:00 P.M.C.Create a batch file that runs the dtsrun utility Use the Microsoft Windows Task Scheduler to run the job each night at 8:00 P.M. Configure the Windows Task Scheduler to use the local system accountD.Move the DTS package to the repository Configure the SQLServerAgent service on the OLAP database server to update the package each night at 8:00 P.M.
[单选题]You are the administrator of a SQL server 2000 computer that contains a database named Acct. The database contains 1.5 GB of data. The server has one 9-GB hard disk that is configured as shown in the Exhibit.9-Gb hard diskDrive C3 GB total400 MB FreeAcct data, mdfDrive D3 GB totaDatabase100 MB FreeserverAcct log. Idf800MBDrive e3 GB tota3 GB FreeYou need to import data into the database without adversely affecting database performance. The data will require an additional 2GB of storage space.What should you do?A.Add another data file on drive E, and then add the file to the PRIMARY filegroup.B.Move the transaction log file to drive E, and set the file growth of Acc_Data.mdf by selecting the Unrestricted file growth option.C.Rebuild all clustered indexes so that they have a fill factor of 100.D.Compress drive D.
[单选题]You are the administrator of two Microsoft Windows 2000 advanced server computers. On these servers, you are configuring a database that will store accounting information for your company.The data must be available at all times. Interruptions in data connectivity should not last longer than five minutes. Any changes to the database should not require you to reconfigure the client computers.How should you configure the database?A.Configure the database on the two servers as a SQL Server 2000 cluster.B.Configure the database on one server, and then configure a standby database on the second server.C.Configure the database on each server. Use Microsoft Distributed Transaction Coordinator to keep the two servers perfectly synchronized.D.Configure the database as a federated database, and then partition half the data on each server.
[多选题]You are the administrator of the homeoffice.local domain. You want to create a shared printer for the company’s executives so that they do not have to wait for their documents to print when the default printer’s queue contains a large number of documents.You configure the new high-priority printer and want to set permissions for the groups shown in the exhibit. Note: The default settings have been cleared.HP Deskjet 722C Properties General Sharing Ports Advanced Security Device SettingsNameAdd#f CREATOR OWNERRemoveff Everyone#f Executives(SERVER1\\Executives)Eff Print Opera: ors (SERVER1\\ Print Operators)enyManage Printers口囗口口Manage documentsAdvancedOKApplyYou select the check box to allow Print permission for the Executives group. You want only the Administrators, Print Operators, Server Operators, and Executives group to be able to print to the printer. What can you do (Select all that apply).A.Remove the Everyone group.B.Select the check box to deny Print permission for the Everyone group.C.Select the check box to deny Manage Documents permission for Everyone group.D.Select all Deny check boxes for the Everyone group.E.Clear all check boxes for Everyone group.
[多选题]You are installing Windows 2000 Server on a new computer that has a single 10-GB SCSI disk. The disk controller is not included on the current Hardware Compatibility List (HCL). You start the computer by using the Windows 2000 Server CD-ROM.When the computer restarts at the end of the text mode portion of Windows 2000 setup, you receive the following STOP error: INACCESSIBLE_BOOT_DEVICE.Which two actions should you take to eliminate the STOP error? (Choose Two)A.Restart the Windows 2000 Setup by using the Windows 2000 Server CD-ROM.B.Select Safe Mode from the Windows 2000 boot menu.C.Remove the Windows 2000 Server CD-ROM from the CD-ROM drive.D.Install a driver for the SCSI controller from a floppy disk.E.Use Device Manager to update the driver for the SCSI controller.
[单选题]You are the network administrator for Ezonexam.com.You create two shared printers on a Windows 2000 Server computer in Ezonexam.com Ezonexam. One printer is shared as Admin, and the other printer is shared as Executive. Both printers are connected to the same print device. You set the priority of the Admin printer to 90 and the priority of the Executive printer to 50.You want all users at the Ezonexam network to be able to send print jobs to either printer. However, you do not want the Executive printer to appear in the browse list when employees other than executives and administrative assistants create a new printer connection on their client computers.What should you do?A.Change the priority of the Executive printer to 99. Change the priority of the Admin printer to 1.B.Deny the Everyone group the Manage Printers permission.C.Change the printer configuration to Not Shared.D.Clear the List in the Directory check box in the printer configuration.
[单选题]You are the network administrator for Ezonexam.com.You are planning to install 10 new Windows 2000 Server computers. Ezonexam has a tight production schedule that requires no changes be made to the Active Directory except during scheduled outages. You schedule the installations during an upcoming network outage which will occur betweenmidnight and 8:00 A.M.You want to complete the installations before production begins in the morning.What should you do?A.Perform. the installations by using four floppy disks create with the Makebt32.exe utility.B.Perform. the installations by using four floppy disks create with the Makeboot.exe utility.C.Perform. the installations by using the Windows 2000 Installation compact disc.D.Perform. the installations by using the Windows 2000 Installation compact disc and a floppy disk containing a Winnt.sif file.
[单选题]You are preparing to install Windows 2000 Server on a new computer. The computer is connected to a network that includes Windows 98 computers and Windows 2000 Server computers.You want to install Windows 2000 Server from source files that are located on a server on the network.What should you do?A.Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Winnt32.exe.B.Start the new computer by using Windows 98 network boot disk. Connect to the network server. Run Winnt.exe.C.On a Windows 2000 Server computer, use Makebt32.exe to create installation startup disk. Start the new computer by using the first disk.D.On a Windows 2000 computer, format a floppy disk. Copy NTLDR, boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.
[单选题]You are the network administrator for Ezonexam.com. The file server for the accounting department is a Windows 2000 Server computer named Ezonexam1. You have created a folder named Payments on the system partition of Ezonexam1. Payments is shared on the network as Payments with the default share permissions. The owner of the Payments folder is domain Admins. The NTFS permissions are shown in the following table.NTFS PermissionsDomain Admins: Allow ReadAccounting: Allow Full ControlThere is a file called review.doc in the Payment folder. The owner of review.doc is a user named Paul who is on a temporary leave of absence. The NTFS permissions for the file list only Paul on the access control list, with Full Control permission.You want to remove Paul’s access to review.doc and grant the Modify permission for a user named Lily Loo. You open the Security properties of review.doc and discover that you are unable to modify the permissions of the file.You want to be able to remove Paul’s access and grant Lily Loo the Modify permission on review.doc.What should you do?A.Take ownership of the file.B.Take ownership of the Payments folder.C.Grant Domain Admins Full control of the Payments shared folder.D.Grant Domain Admins Change for the Payments shared folder.
[多选题]You are preparing to install Windows 2000 Professional on 75 new computers. You want to create a standard installation image to use on all the new computers. The computers have several different configurations of hard disks and hardware components.You install Windows 2000 Professional and other standard software on one of the computers. You log on to the computer using the local Administrator account. You configure the standard applications and customize the desktop settings you intend to deploy.You run the Setup Manager and create a Sysprep.inf file. You copy Sysprep.exe and Setupcl.exe to the C:\Sysprep folder. You run Sysprep.exe and run your third party disk imaging software.You copy the image to the several test computers and restart the computers. When the installation is complete, you find that some of the computers do not function at all. You also find that the desktop settings do not appear as you have configured them on the original computer.You want to correct the imaging process and ensure that all computers have the same standard desktop.What should you do? (Choose two)A.Copy Sysprep.inf to C:\Sysprep folder.B.Copy the Administrator profile to the Default User profile, and then grant permissions to the Everyone group to use the profile.C.Include the-pnpparameter for Sysprep.exe when you rerun that utility.D.Include the-nosidgenparameter for Sysprep.exe when you rerun that utility.
[多选题]You are the network administrator for Ezonexam.com. Your network has 210 Windows 2000 Professional computers and eleven Windows 2000 Server computers. Users on the network save their work files in home folders on a network server. The NTFS partition that contains the home folders has Encrypting File System (EFS) enabled. A user named Sandra leaves Ezonexam.com. You decrypt the files for her manager. When the manager attempts to open any of the files, he receives the following error message: Access is denied.You want the manager to be able to access the files.What should do? (Each correct answer presents a complete solution. Choose two.)A.Move the files from Sandra’s folder to the manager’s folder.B.Grant the manager NTFSFull Controlpermission to the files.C.Run theciphercommand to create a new file encryption key for the manager.D.Run theciphercommand to generate an EFS recovery agent key and certificate.E.Grant the manager NTFSList Folder Contentspermissions to the folder containing Sandra’s files.
[单选题]As a Ezonexam employee you are the desktop administrator of a Windows 2000 Professional computer.The Windows 2000 Professional computer has 25 MB of free disk space drive C and 800 MB of free disks pace on drive E. You are unable to print large documents because if inadequate disk space on drive C.You want to be able to use the space on drive E to print large documents.What should you do?A.From the Printer Properties dialog box, change the location field to E:\Winnt\System32\Spool\Printers.B.From the Print Server Properties dialog box, change the location of the spool folder to any existing file path on drive E.C.Copy the C:\Winnt\System32\Spool\Printers folder to the E:\Winnt\System32\Spool\Printers folder.D.Mount drive C as a subdirectory on drive E.
[单选题]You configure your Windows 2000 Professional computer for Internet Connection Sharing and for TCP/IP filtering as shown in the exhibit.TCP/IP Filtering v Enable TCP/IP Filtering (All adapters)C Permit AllC Permit Allo Permit AllC Permit OnlyC Permit OnlyC Permit Only-TCP PortsUDP PortsIP Protocols2321139157AddRemoveRemoveremoveanceYou test your TCP/IP filtering configuration from another client computer. You can access web sites, but you cannot access FTP sites.What should you do to be able to access FTP sites A.Add Port 21 to the TCP Ports section.B.Add Port 138 to the TCP Ports section.C.Add Port 21 to the IP Ports section.D.Add Port 138 to the IP Ports section.
[单选题]You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.What should you do?A.Configure the DHCP scope to add additional IP addresses.B.Run Rbfg.exe from the RemoteInstall\Admin folder on the RIS server.C.Modify the startup sequence in the CMOS of the remaining computers.D.Create computer accounts on the remaining computers in the Active Directory.
[单选题]You are the network administrator for Ezonexam.com. You configure a shared printer on a Windows 2000 Server computer. The printer connects to a Hewlett Packard JetDirect print device that uses DLC. This print device is on the same network segment as the server.Six months later, you relocate the print device to a different network segment. Users report that they are able to send print jobs to the printer but that their print jobs no longer print.You need to ensure that the printer and the print device are working properly. What should you do?A.Configure the JetDirect print device to use DHCP.B.Uninstall and reinstall the DLC protocol from the server.C.Configure the printer and the JetDirect print device to use the LPR printing protocol.D.Delete the printer. Re-create the printer by using DLC to connect to the JetDirect print device.
[单选题]Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined.The Windows 2000 Server CD-ROM is unavailable. You want install Windows 2000 Server from source files that are located on a server on the network. You also want the entire hard disk of the new computer to be used for the system partition.What should you do?A.On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.B.On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, Ntbootdd.sys to this disk. Start the new computer by using the disk.C.Start the new computer by using a Windows 98 network boot disk. Connect to the network server. Run Dsclient.exe. Create and format a 20-GB FAT32 partition.D.Start the new computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Connect to the network server. Run Winnt.exe.E.Start the computer by using a Windows 98 network boot disk. Create and format a single FAT32 partition. Start the new computer by using a Windows 2000 Emergency Repair Disk.
[单选题]You are the administrator for Ezonexam’s network.Your network includes Windows 2000 Professional client computers, Windows 2000 Server computers, Windows XP Professional computers, and UNIX client computers. Users of the UNIX operating system send print jobs to shared printers on a UNIX computer named PrintServ.You want to make the shared printers on PrintServ available to the Windows 2000 Professional computers, the Windows 2000 Server computers and the Windows XP Professional computers.What should you do?A.Use the SRVANY utility from the Windows NT Resource Kit to run the LPR program as a service.B.Configure each of the printers to support TCP/IP printing.C.Create an LPR port on each client that is configured to use PrintServ.D.Configure each of the printers to use LPR port
[单选题]You create two shared printers on a Windows 2000 Server computer in Ezonexam.com Ezonexam. One printer is shared as Admin, and the other printer is shared as Executive. Both printers are connected to the same print device. You set the priority of the Admin printer to 90 and the priority of the Executive printer to 50.You want all users at the Ezonexam network to be able to send print jobs to either printer. However, you do not want the Executive printer to appear in the browse list when employees other than executives and administrative assistants create a new printer connection on their client computers.What should you do?A.Change the priority of the Executive printer to 99. Change the priority of the Admin printer to 10.B.Change the share name of the Executive printer to Executive$. Manually reconfigure client computers that are already connected to the Executive printer.C.Deny the Everyone group permission to access the Executive printer. Allow access to the users who are allowed to include the printer in their browse lists.D.Install separate device drivers for the Executive printer. Configure NTFS permissions on the device driver files to allow access only to the System account and to users who are allowed to include the printer in their browse lists.
[单选题]You are the administrator of a Windows NT 4.0 Terminal Server Edition computer. The server has one hard disk, which is divided into two partitions The first partition contains the Windows NT 4.0 system files and is formatted as FAT. The second partition contains application data and user data. This second partition is formatted as NTFS. The server currently has Service Pack 3 installed.You need to upgrade the server to Windows 2000 Server. You want to ensure that no application data or user data is lost during the upgrade. You also want to perform. the minimum number of steps necessary to complete the upgrade.What should you do? (Choose all that apply)A.Convert the system partition to NTFS.B.Install service pack4 or later on the server.C.Use a Windows 2000 Server CD to start the server. In setup, select the option to upgrade.D.Replace the Terminal Server installation with a standard Windows NT server 4.0 installation.
[单选题]You are the administrator of a network that includes Windows NT Server 4.0 computers, Windows NT Workstation 4.0 computers, and UNIX computers. The network consists of a single Windows NT domain.You are upgrading a Windows NT Server computer named Server1 to Windows 2000 Server. Server1 is a BDC in the domain. The existing DNS server is a UNIX computer that supports SRV (service) records and is configured to accept dynamic updates. The existing WINS server is another Windows NT Server computer.You want to configure Server1 as a domain controller in a New Active Directory forest. You want the existing Windows NT domain accounts to be upgraded to Active Directory. You plan to upgrade the other domain controllers in the domain to Windows 2000 after the upgrade of Server1 is complete.You want to perform. the upgrade of Server1 with the least possible impact on other computers on the network. What should you do?A.Promote Server1 to the PDC of the domain. Run Windows 2000 Setup on Server1.B.Run Windows 2000 Setup on Server1. At the end of Setup, configure Server1 as a DNS server and a WINS server.C.Add a static mapping for Server1 on the WINS server. On the DNS server, create an SRV record for the LDAP service on Server1. Run Windows 2000 Setup on Server1.D.Install the Microsoft DNS service on an existing Windows NT server. Apply Windows NT 4.0 service pack 4 or later to the server. Run Windows 2000 Setup on Server1.
[单选题]You are the administrator of Ezonexam.com’s network.You want to connect your Windows 2000 Professional computer to a new TCP/IP based laser print device. The print device is Plug and Play compliant and is included on the current Hardware Compatibility List (HCL). When you attempt to create a new TCP/IP printer port you receive the following error message:Specified Port cannot be added. The port already exists.You want to be able to use the new TCP/IP printer.What should you do?A.Modify the properties of the existing printer port to use the new print device.B.Change the LPT port setting to bidirectional in the BIOS on your computer.C.Change the LPT port setting to enable legacy Plug and Play detection on your computer.D.Obtain and install the WDM-compliant device drivers and printing software for the printer.
[单选题]You are the administrator of a Windows 2000 Professional computer named Computer1. Computer1 has a shared color laser printer named Printer1. Printer1 will not turn on.The printer queue for Printer1 has three jobs waiting to print. You want to enable the three waiting print jobs to print to an identical print device, which has been shared as Printer2 on Computer2. You also want to connect users who currently connect to Printer1 to automatically use Printer2 without having to reconfigure their default printer.What should you do?A.Enable bidirectional support for Printer1.B.Change the share name of Printer2 to Printer1.C.Configure Printer1 to add a port, and set the port to \\Computer2\Printer2.D.Configure the printer server properties to use the path \\Computer2\$Winnt$\System32\Spool\Printers.
[单选题]You are the administrator of your company’s network. A user named Paul in the service department has a Windows 2000 Professional computer. Paul needs to access the files that are in a shared folder on his computer. A local group named Sales has permissions to access the data. Paul is a member of the Sales local group but he cannot access the file he needs.What should you do?A.Grant Paul NTFS permission so that he can access any parent folder to files in the shared folder.B.Share the Sales folder and grant Paul shared folder permission to access the shared Sales folder.C.Remove Paul from any other group that has been explicitly denied access to the Sales folder.D.Delete the Sales local group and recreate it. Add individual user accounts from the Sales department back into Sales local group.
[单选题]You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade computer1. During the upgrade of computer2, a series of power outages interrupts the upgrade.You discover that the upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from the Windows 2000 Professional CD-ROM. You decide to use computer1 to help recover the failed upgrade.What should you do?A.On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys, Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows 2000 Professional CD-ROM.B.From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys, Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart the upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM.C.On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks.D.On computer1, perform. a remote installation from a network share. On computer2, when the text portion of setup has completed, resume the installation by using the Setup Manager.
[单选题]You are the network administrator for Ezonexam.com. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional.You want to upgrade your computer to Windows 2000 Professional.What should you do?A.Replace the SCSI adapter card with a Windows 2000 Professional compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.B.Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:\Winnt folder. Start the installation from the Windows 2000 Professional CD-ROM.C.Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted.D.Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Using Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM.
[单选题]You want to upgrade 150 computers from Windows NT Workstation 4.0 to Windows 2000 Professional.You create an Unattend.txt file by using Setup Manager. You copy the file to a floppy disk.You then start the installation on a test computer by using the Windows 2000 Professional CD-ROM.You insert the floppy disk after the computer starts.Although you had set the user interaction level to full unattended mode, you are prompted for all the required parameters. You want to ensure that the unattended installation does not prompt you for input.What should you do?A.Add a [Data] section to Unattend.txt, and set the Unattendedinstall parameter to Yes.B.Add an [Unattend] section to Unattend.txt, and set the OEMPreinstall parameter to yes.C.Rename Unattend.txt on the floppy disk to Winnt.sif.D.Create a \$Oem$\$1 folder on the hard disk of the test computer, and copy Unattend.txt to the folder.
[多选题]You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1.Ezonexam1 is a backup domain controller and a member of Ezonexam.com’s Windows 2000 Active Directory forest. The forest consists of three Windows 2000 domains. Ezonexam1 is the only remaining Windows NT Server 4.0. A new version of the application that runs on Windows 2000 Server has been developed that requires the use of Universal groups. The application will not run on a domain controller.You need to upgrade Ezonexam1 to Windows 2000 Server and prepare for the installation of the new version of the application on Ezonexam1.What should you do?(Each correct answer presents part of the solution. Choose two.)A.Install Windows 2000 Server on Ezonexam1. Configure Ezonexam1 to use a dual boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server. Install the new application on the Windows NT Server 4.0B.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select option to make Ezonexam1 a member server.C.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade select the option to make Ezonexam1 a domain controller. After the upgrade, demote the domain controller.D.Make any user accounts on Ezonexam1 members of Domain Global groups.E.Convert the Windows 2000 domains to native mode.
[多选题]You are the administrator of a Windows 2000 network. The network includes a Windows 2000 Server computer that is used as a file server. More than 800 of Ezonexam.com’s client computers are connected to this server.A shared folder named Data on the server is on an NTFS partition. The data folder contains more than 200 files. The permissions for the data folder are shown in the following table.Type of permission Account PermissionShare Users ChangeNTFS Users Full ControlYou discover that users are connected to the Data folder. You have an immediate need to prevent 10 of the files in the Data folder from being modified. You want your actions to have the smallest possible effects on the users who are using other files on the server.What two actions should you take? (Choose Two)A.Modify the NTFS permissions for the 10 files.B.Modify the NTFS permissions for the Data folder.C.Modify the shared permissions for the Data folder.D.Log off the users from the network.E.Disconnect the users from the Data folder.
[单选题]You are the administrator of a Windows NT Server 4.0 computer named Ezonexam1. Ezonexam1 is a backup domain controller (BDC), and a member of Ezonexam.com’s Windows 2000 Active Directory domain. Ezonexam1 contains five hard disks. Disk 0 and 1 are configured as a Windows NT 4.0 mirror set.The mirror set contains the operating system files and 500 MB of free disk space. Disk 2, 3 and 4 are configured as a Windows NT 4.0 stripe set with parity and contain employee data files. The Windows NT 4.0 stripe set with parity has a maximum capacity of 140 GB and contains 15 GB of free disk space.Ezonexam1 runs an application that is used by 400 company employees. A new version of the application is available. You need to install the new version, but it requires Windows 2000 Server. Also, the application will not run on a domain controller.You need to install the new application on Ezonexam1 as quickly as possible. What should you do first?A.On Ezonexam1, back up the employee data files. Then format all five disks and perform. a clean installation of Windows 2000 Server. Restore the employee data files.B.On Ezonexam1, install Windows 2000 Server. Configure Ezonexam1 to use a dual-boot configuration that includes Windows NT Server 4.0 and Windows 2000 Server.C.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a member server.D.Upgrade Ezonexam1 to Windows 2000 Server. During the upgrade, select the option to make Ezonexam1 a domain controller. After the upgrade is complete, demote Ezonexam1.
[单选题]Ezonexam.com’s network contains two domain controllers and approximately 500 client computers. The domain controllers run Windows 2000 Server. The client computers run Windows 2000 Professional. The majority of users have mobile computers. Users in Ezonexam often travel with their mobile computer for extended periods of time and do not have remote access to Ezonexam.com’s network.You want to configure the domain controllers so that DNS only contains entries for computers that are active on the network. You also want to ensure that when users return you do not have to manually create or delete DNS entries.How should you configure the DNS servers?A.Configure both domain controllers with Active Directory integrated primary zones for the domain and enable secure dynamic updates for the zone.B.Configure both domain controllers with Active Directory integrated primary zones for the domain and the secure cache against pollution option for the zone.C.Configure both domain controllers with Active Directory integrated primary zones for the domain and enable scavenging and dynamic updates for the zone.D.Configure both domain controllers with standard primary zones for the domain and enable scavenging for the zone.E.Configure one server with a standard primary zone for the domain, and configure at least one server with an Active Directory integrated primary zone.
[单选题]You are the network administrator for Ezonexam.com.You are planning to upgrade 10 Windows NT Server 4.0 computers to Windows 2000 Server. You want to perform. the upgrades by means of a distribution folder. You have used the distribution folder to successfully upgrade other Windows NT Server 4.0 computers to Windows 2000. For these 10 new upgrades you wan to include a new service pack.You need to include the new service pack in the distribution folder so that the service pack is automatically installed during the upgrade process.What should you do?A.Create a sub folder named $OEM$\$C\SP under the i386 folder. Copy the new service pack to that subfolder.B.Create a subfolder named $OEM$\$$\SP under the i386 folder. Copy the new service pack to that subfolder.C.Run Update.exe from the new service pack and specify the -s option.D.Run winnt32 on the Windows NT Server 4.0 computers and specify the /u option
[单选题]You are the administrator of a Windows 2000 Network for Ezonexam Inc. The network includes four Web servers named WWW1, WWW2, WWW3, and WWW4. Your network also includes a Windows 2000 Server computer that uses DNS.Each Web server contains exactly the same content, and users accessing www.Ezonexam.com can be directed to any one of them.You add records to your DNS server, as shown in the following table.Record type Name IP addressCNAME www 192.168.10.5CNAME www 192.168.10.6CNAME www 192.168.10.7CNAME www 192.168.10.8When you examine the logs for the Web servers, you discover that all incoming traffic is being directed to 192.168.10.5, which is the IP address for WWW1.You want the incoming traffic to be balanced across the four Web servers. What should you do?A.Select the Disable recursion check box in the properties of the DNS server.B.Enable round-robin in the properties of the DNS server.C.Enable W3C logging in the properties of the Web servers.D.Install and configure Network Load Balancing on WWW1.
[单选题]You are the administrator of a Windows 2000 Server network. On each server, you format a separate system partition and a separate boot partition as NTFS.Several months later, you shut down one of the servers for the maintenance. When you try to restart the server, you receive the following error message NTLDR is missing. Press any key to restart.You want to install a new NTLDR file on the server, but you do not want to lose any settings you made since the original installation. What should you do?A.Start the computer by using the Windows 2000 Server CD-ROM and choose to repair the installation. Select the Recovery Console and copy the NTLDR file on the CD-ROM to the root of the system volume.B.Start the computer by using the Windows 2000 Server CD-ROM and choose to reinstall. When installation is complete, copy the NTLDR file to the root of the boot volume.C.Start the computer by using a Windows 2000 bootable floppy disk. From the command prompt, run the sfc/scanboot command.D.Start the computer by using a Windows 2000 bootable floppy disk. Run the File Signature Verification utility.
[多选题]You want to upgrade a Windows NT Server 4.0 computer named Server34 to Windows 2000 Server. Server34 is a member server in a Windows 2000 domain named marketing.fabrikam.local. The domain runs in native mode.You want to change the role of Server34 from a member server to a domain controller in the same domain. What should you do? (Choose Two)A.Reinstall Windows NT Server 4.0 on Server34 in the same WINNT folder, and make Server34 a BDC in the marketing domain.B.Use Server Manager on Server34 and promote Server34 to a PDC for the marketing domain.C.Upgrade Server34 to Windows 2000 Server.D.Run the Active Directory installation wizard to make Server34 a domain controller in the marketing.fabrikam.local domain.E.Run the Active Directory installation wizard to convert Server34 to a domain controller in the marketing.fabrikam.local domain.
[单选题]You are the administrator of a Windows 2000 Active Directory network. The network consists of a single domain. The domain includes 20 Windows NT Workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers.You create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator. This default user policy denies access to Network Neighborhood. You then install Terminal Services on one of the servers and Terminal Services Client on the 20 Windows NT Workstation client computers.You find that the users of the Terminal Server can still browse the network when they open My Network Places. You want to prevent all users from browsing the network.What should you do?A.Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the Terminal Server.B.Copy the Windows NT policy file to the 20 Windows NT Workstation computers.C.Create a Windows 2000 Group Policy that denies user access to My Network Places.D.Edit the local registry on the Windows NT Workstation computers to deny access to Entire Network in Network Neighborhood.
[单选题]You configure an HP Jet Direct print device as sown in the Network Diagram exhibit.024010610430110161052010016Nhpse10.520.50/16HP JetDirect Print DeviceYou want to create and share a printer at Srv2.sales.justtogs.com that is connected to the TCP/IP port of the print device. However, when you enter the IP address of the device, you receive the dialog box shown in thePrinterPortWizard exhibit.PrinterPortWizardAdd Standard TCP/IP Printer Port WizardAdditional Port Information RequiredThe device could not be identifiedThe device is not found on the network. Be sure that1. The device is turned on2 The network is connected3. The device is properly configured4. The address on the previous page is correctIf you think the address is not correct, click Back to return to the previous page. Then correctthe address and perfcm another search on the network. If you are sure the address is corrrectselect the device type belowDevice typeC Standard Generic Network CardCustom Settings<BackNextCanceWhat should you do?A.Select Hewlett Packard JetDirect from the Standard drop-down list.B.Select the Custom option button, click the Settings command button, and select the LPR protocol.C.Change the IP address of the print device to 10.5.20.200.D.Change the subnet mask of the print device to 255.0.0.0.E.Change the default gateway address on Srv2.sales.justtogs.com to 10.5.20.100.
[单选题]You plan to install Windows 2000 Server on 10 new computers. These servers will provide file and print services in branch offices of Ezonexam.com. The company wants each branch office to purchase its own copy of Windows 2000 Server, and the installation in each branch office should use the serial number associated with the branch office’s own copy.You want to install, configure, and test Windows 2000 Server on these computers at the main office before shipping the computers to the branch offices. You want users in the branch office to enter the computer names and serial numbers when they receive the computers.What should you do?A.Install Windows 2000 Server on the computers by using an unattend.txt file, and then use the registry editor to remove the computer name and license details.B.Start the installation process from an MS-DOS boot disk. Install Windows 2000 Server on the computers from an existing server by running the Winnt command with the PreInst switch.C.Install Windows 2000 Server on the computers, and then use Setup Manager to create a sysprep.inf file for sysprep.exe. Place the sysprep.inf file on the computers and run the sysprep-nosidgen command.D.Create an unattend.txt file by using Setup Manager. Include the following line in the unattend.txt file. emPrenistall=YES. Use this file to perform. the installation.
[单选题]Your network includes Windows 2000 Professional client computers, Windows NT Workstation 4.0 client computers, Windows 95 client computers and UNIX client computers. Users of the Windows operating systems send print jobs to shared printers on a Windows 2000 Server computer named PrintServ. The UNIX client computers support the LPR printing protocol.You want to make the shared printers on PrintServ available to the UNIX computers. What should you do?A.Configure each of the printers to use an LPR port.B.Install Microsoft Print Services for UNIX on PrintServ.C.Configure each of the printers to support TCP/IP printing.D.Use the SRVANY utility from the Windows NT Resource Kit to run the LPR program as a service.
[单选题]Ezonexam uses static TCP/IP addressing for its servers. You are installing Windows 2000 Server on a new computer named VE32. VE32 needs to join an existing Windows 2000 Active Directory domain named Ezonexam.com. While installing VE32 you are unable to join the existing domain. You use another Windows 2000 Server to attempt to create a computer account for the new server in the domain. When attempting to create the new computer account you receive the following message.Active Directory ServiceThe object VE32 could not be created.The problem encountered was:The directory service has exhausted the pool of relative identifiers.You need to resolve the problem before continuing the installation.What should you do?A.Restart the domain’s Global Catalog server.B.Restart the domain’s RID master server.C.Restart the domain’s PDC Emulator server.D.Restart the domain’s Infrastructure Master.
[单选题]You are the administrator responsible for security and user desktop settings on your network. You need to configure a custom registry entry for all users. You want to add the custom registry entry into a Group Policy object (GPO) with the least amount of administrative effort.What should you do?A.Configure an ADM template and add the template to the GPO.B.Configure an INF policy and add the policy to the GPO.C.Configure a Microsoft Windows installer package and add the package to the GPO.D.Configure RIS to include the registry entry.
[单选题]You have 17GB of private files on drive D on your Windows 2000 Professional computer. You have shared the files as private_files. You do not want other users to see this share name in the browse list.You want all other share names to continue to appear in the browser list.What should you do?A.Stop the computer browser service, and disable the startup state.B.Change the comment for the share to hidden:YesC.Change the share name to private_files$.D.Add a hidden entry to the HKLMSystem\currentcontrolset\services\larmanserver\shares\private_files registry value entry.
[单选题]Your Windows 2000 Professional computer has 10 shared folders that are available to other network users. A user reports that he cannot access a shared folder named ShareA.You want to respond to the user’s problem as quickly as possible by using an administrative tool.However, you cannot remember the server location of ShareA. What should you do?A.Use Windows Explorer to display the file paths of your shared folders.B.Use Storage in Computer Management to view logical drive properties.C.Use Event Viewer in Computer Management to search for shared folder error messages.D.Use System Tools in Computer Management to display the file paths of your shared folders.
[单选题]You are the administrator of Ezonexam’s network.An employee named Mark has a local user account on a Windows 2000 Professional computer. Mark has rights and permissions to multiple files and folders on the computer. All of Mark’s permissions are being granted through group membership. Mark recently hired a new employee named Eric as his assistant.You want Eric to have the same rights and permissions that Mark has on the Windows 2000 Professional computer. You want to accomplish this with the least amount of administrative effort.What should you do?A.Create a new local group. Create Eric’s user account. Add Mark’s user account and Eric’s user account to the new group.B.Create Eric’s user account. Copy Mark’s profile to Eric’s user account.C.Create Eric’s user account. Make Eric’s user account a member of all the same groups as Mark’s user account.D.Create Eric’s user account. Copy the registry entries in the subkey that correspond to Mark under HKEY_USERS to the subkey that corresponds to Eric.
[单选题]You are the administrator of your company’s network. The network is configured as shown in the exhibit.F口口You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.What should you do?A.Add a computer running DHCP Relay Agent to the marketing segment.B.Add a computer running the network monitor driver to the marketing segment.C.Move the Windows 2000 Server computer running WINS to the marketing segment.D.Move the Windows 2000 Server computer running Active Directory to the marketing segment.
[单选题]You are the desktop administrator for Ezonexam.com’ssalesdepartment. Ezonexam.com’s network contains a RIS server.You need to install Windows 2000 Professional on a computer that has a SCSI disk subsystem. You start the computer by using the Windows 2000 Professional CD-ROM, and you begin the installation.However, Setup reports that it cannot find any disk on which to install Windows 2000 Professional.You start the computer by using a RIS bootable floppy disk, and you receive the same result.What should you do?A.Add an answer file to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.B.Add the SCSI-controller driver to the root directory of the RIS bootable floppy disk. Start the computer by using the RIS bootable floppy disk, and run Setup by using RIS.C.Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide an answer file on a floppy disk.D.Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide a SCSI-controller driver on a floppy disk.E.Start the computer by using the Windows 2000 Professional CD-ROM, and run Setup. After Setup starts, provide the appropriate HAL on a floppy disk.
[多选题]You recently upgraded all Windows NT Workstation 4.0 computers to Windows 2000 Professional. You want to give a new employee named Maria the ability to back up files, share resources, and install programs on a client computer that she shares with other users. You do not want Maria to be able to read other users’ files.What should you do to accomplish these goals? (Choose all that apply)A.Add Maria’s user account to the System group.B.Add Maria’s user account to the Interactive group.C.Add Maria’s user account to the Power Users group.D.Add Maria’s user account to the Administrators group.E.Add Maria’s user account to the Backup Operators group.
[单选题]From your Windows 2000 Professional computer, you need to print from a 16-bit accounting application to a network printer named Printer02. Printer02 is attached to a print server named PrtSrv. The accounting application allows you to print only to a local LPT port.You currently have two printers attached to your local LPT1 and LPT2 ports. You need to be able to print to the network printer and to both local printers. You install the driver for the network printer on your computer.What must you do next to enable printing on the network printer?A.Create a new local printer port named PrtSrv\Printer02, and configure the printer to use the new port.B.Create a new local printer port named PrtSrv\Printer02. In the properties for the new port, select the option to print directly to the printer. Configure the printer to use the new port.C.Run thenet use Lpt3: \\PrtSrv\Printer02command.D.Run thenet print\\PrtSrv\Printer02command.
[单选题]On a Windows 2000 Professional computer, you run a shipping application that prints packing labels to a laser printer for every outgoing shipment, 24 hours per day. During peak hours, your company ships more than 1,000 packages per hour.You have just purchased a second identical laser printer to aid in printing. You want to configure the printers so that the jobs are load balanced. You connect the second laser printer to the computer.What must you do next?A.Enable bi-directional support.B.Enable printer pooling.C.Configure print spooling.D.Configure print sharing.
[单选题]You are the administrator of Ezonexam’s Windows 2000 network.You need to store secured files for Ezonexam’s accounting and legal departments on a Windows 2000 Professional computer. You create two shared folders named Accounting and Legal with the default NTFS and share permissions. You also create two groups named Accounting and Legal and add the appropriate user accounts into the appropriate groups.To meet the security requirements for the shared folders the following criteria must be met:1. Users in both departments must be able to update their own files from the network.2. Users in the accounting department must be able to view the legal department’s documents from the network.3. Users in the legal department must be prevented from being able to view the accounting department’s documents from the network.You want to ensure that all security requirements are met using the least amount of administrative effort.What should you do?A.Allow the Accounting groupReadpermission on the Accounting share and the Legal shared folder. Allow the Legal groupReadpermissions on the Legal shared folder.B.Allow the Accounting groupFull Controlpermissions on the Accounting shared folder and the Legal shared folder. Allow the Legal groupFull Controlpermission on the Legal shared folder.C.Deny the Everyone groupFull Controlpermissions on the Accounting shared folder.D.Deny the Legal groupFull Controlpermission on the Accounting shared folder.
[单选题]You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation.You notice that users can still save files to drive D.You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer?A.Use Windows 2000 Professional to configure drive D as a dynamic volume.B.Use Windows 2000 Professional to enable Encrypting File System (EFS) on drive D.C.Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permission.D.Reinstall Windows NT workstation after configuring the disk code task.
[单选题]A folder on your Windows 2000 Professional computer contains bitmap files that have been compressed from 2MB to 1MB. You want to copy one of the compressed bitmap files from the hard disk to 1.4-MB floppy disk.When you attempt to copy, you receive the following error message ’Destination drive is Full’.What should to do?A.Move, rather than copy, the compressed bitmap file to the floppy disk.B.Reformat the floppy disk. Then copy the compressed bitmap file to the floppy disk.C.Use another program to compress the bitmap file before copying it to the floppy disk.D.Copy an empty compressed folder to the floppy disk. Then copy the compressed bitmap file to the folder on the floppy disk.
[单选题]You want to install Windows 2000 Professional on 45 new computers on your company’s network. You first install Windows 2000 Professional on one of the new computers.You log on to the computer by using the local Administrator account. You install Microsoft Office 97, a virus scanner, and other company-standard applications. You then create a RIS image of the computer you configured.You want to configure the RIS image so that the standard applications will be accessible to the user when the user first logs on to the network. What should you do?A.Run Rbfg.exe before installing the standard applications.B.Run RIPrep.exe before installing the standard applications.C.Copy the All Users profile to the Default Users profile.D.Copy the local Administrator account profile to the Default Users profile